Argon user guide/Earthing

From Granite Devices Knowledge Wiki
< Argon user guide
Revision as of 13:14, 1 September 2013 by Tero K (Talk | contribs)


Jump to: navigation, search

Connecting a protective earth to Argon drive is the most crucial single connection to be made. Argon has two earthing methods:

  • Earthing through the J4 PE terminal (always required)
  • Earthing the device case (highly recommended and may be required by regulations in some countries)


Earthing through the J4 PE terminal

This is a mandatory connection. Follow the Argon wiring instructions.

Earthing the device case

Earthing points of the case
Proper earthing wire installation with toothed locking washers ensure an electrical contact through surface coatings.
Attaching protective earth wire to the case can provide much lower impedance PE connection compared to the J4 terminal making it highly recommended addition to grounding. Using both of the methods also provides redundancy in the case of one method fails.

After wiring, verify electrical connection by using a resistance meter between the case PE wire and J4 PE terminal while J4 PE wire is not connected.


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.