Difference between revisions of "High dynamic range torque control"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
Line 5: Line 5:
 
==Applications==
 
==Applications==
 
HDRT helps following ways:
 
HDRT helps following ways:
*Smoother motion with high resolution feedback
+
*Smoother, less jittering motion with high resolution feedback
 
*Quiet operation, no hiss from motor
 
*Quiet operation, no hiss from motor
 
*Allow supporting wide power range of motors within single drive
 
*Allow supporting wide power range of motors within single drive

Revision as of 20:52, 13 June 2013

All measured signals differ more or less from the true physical value (general example image). HDRT aims to minimize error and noise of measured motor phase currents by adjusting current sensor sensitivity by the means of a low noise amplifier prior to analog-to-digital conversion.

Torque control is the most important single instrument present in modern motor drives. All operations drive does, are handled finally by a torque controller - even if motor is being operated in velocity or positioning modes.

High dynamic range torque control a.k.a. HDRT is a torque control technology built in VSD-E/XE series and Argon servo drive series. HDRT yields approximately 14 bits of torque resolution which is 16 times higher compared to standard 10 bit torque resolution found from an average drive. HDRT has been implemented by using on-the-fly adjusting current sensor gain control combined with low noise electronics and at least 16 bit digital signal path inside the drive.

Applications

HDRT helps following ways:

  • Smoother, less jittering motion with high resolution feedback
  • Quiet operation, no hiss from motor
  • Allow supporting wide power range of motors within single drive