Analog setpoint

From Granite Devices Knowledge Wiki
Revision as of 12:23, 15 May 2015 by Tero K (Talk | contribs) (Differential signaling)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search
Analog reference signal is ideally clean and precise (blue). However, in problematic cases electromagnetic interference is coupled to the signal (red) causing inaccuracies like noise and offset error/drifting.

Analog setpoint is one of setpoint signal types used in motion control.

The most typical setpoint voltage range is +/-10V where

  • -10V equals the most negative setpoint (-100%)
  • 0V equals zero setpoint
  • 10V equals most positive setpoint (+100%)
  • Any value between is interpolated linearly

Another common voltage range is 0..5V where zero setpoint may be at 2.5 VDC (bias voltage).

Differential signaling[edit | edit source]

Analog setpoint input in target device is typically differential. Differential input requires 3 wires from source device:

  • Positive input
  • Negative input
  • Ground

The actual setpoint value will be calculated from the differential of positive and negative inputs. This eliminates error from ground currents and also reduces sensitivity to EMI noise.

Differential signaling on wikipedia

Example[edit | edit source]

Lets assume +/-10V is used as torque setpoint in VSD drive. In this case 0V equals no torque, and 10V equals 100% of peak torque configured in the drive, 5V equals 50% torque etc.

Peak torque can be configured to drive with GDtool as peak current limit. Torque and current are directly proportional, so torque setpoint is also a current setpoint.


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.