Difference between revisions of "Argon user guide"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
Line 2: Line 2:
 
{{Disclaimer}}
 
{{Disclaimer}}
 
{{ArgonManualNav}}
 
{{ArgonManualNav}}
 +
{{TOC|right}}
 
[[File:Dangerelectric.gif|96px|float|right]][[File:Dangermachine.gif|96px|float|right]]
 
[[File:Dangerelectric.gif|96px|float|right]][[File:Dangermachine.gif|96px|float|right]]
 
This is the official and latest setup guide of [[Argon (servo drive)]]. Read it through before installing or operating Argon.
 
This is the official and latest setup guide of [[Argon (servo drive)]]. Read it through before installing or operating Argon.

Revision as of 14:35, 14 August 2013


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.

float
float

This is the official and latest setup guide of Argon (servo drive). Read it through before installing or operating Argon.

NOTE: This guide attempts to be as complete and precise as humanly possible, however it can never be perfect. Writers of this guide are not responsible if possible damages or losses caused by mistakes or lacks of this guide.

IMPORTANT: Argon drive should be installed and operated only by qualified electricians. Dangerous voltages and mechanics are involved and possibility of severe injury or even death is possible in case of installation or usage errors.

CURRENT STATUS: This guide is work in progress and should not be followed until this notice has been removed.

Reading the guide

Read trough the guide by following the outline and follow the hyper links to subtopics provided in the articles. Many useful and important key points are presented as:

Articles containing safety & equipment damage related information of Argon

In addition to other documentation, make sure you have carefully read and understood all of the pages containing safety and equipment damage warnings before operating the device:

Argon introduction

Argon is a servo motor drive designed by Granite Devices. If you are not familiar with the features and specifications of the drive, see following articles:

The setup process

Step1 collectthings.png

Read the page List of things needed for details.

Step2 granityconnection.png

Connect drive to PC with SimpleMotion V2 USB adapter and Granity to test connection, upgrade firmware if necessary and to learn Granity. If you're already familiar with all this, you may skip this step. Read the article Making the first Granity connection

Step3 wiring.png

Carefully do the full wiring of the servo system. Consult an qualified electrician if necessary as dangerous voltages will be present. Befower powering up, triple check everything by using multimeter to find short circuits. Read the main article Wiring.

Step4 tuningbaremotor.png

Power-up the system and connet again with Granity. Now set-up the motor to work as intented. See the main article Drive paramerization. If you already have a working configuration to your motor model, you may just load the settings file to the drive.

Step5 tuningmachine.png

After motor and drive are fully functional, connect motor to the mechanical load and find the optimum velocity or position control gains. Read the main article Servo motor tuning.

Troubleshooting

In case of troubles, refer to the articles in general troubleshooting category and Argon troubleshooting category.