Argon J3 connector wiring
From Granite Devices Knowledge Wiki
Argon's J3 is a 3 pole terminal block type connector used for supplying 24VDC to drive and optionally controlling motor solenoid brake.
Pin-out[edit | edit source]
|Pin #||Pin name||Description||Connection|
|1||BK||Motor brake output||If motor has a 24V solenoid brake, connect brake between BK and V+|
|2||V+||24V supply positive input||Connect to 24V PSU +|
|3||V-||24V supply ground, on J1, J2.x and J5 connectors tied to GND||Connect to 24V PSU -|
24VDC typical current consumption is between 0.1 - 0.7ADC depending on how much current is drawn by feedback device and an optional motor brake.