Controller

From Granite Devices Knowledge Wiki
Revision as of 12:27, 31 March 2015 by Tero K (Talk | contribs)


Jump to: navigation, search

Controller generally means something that is in control of various things.

In motion control this usually means a CNC controller, software, PLC or similar that generates the setpoint signals for the drive as well as other control signals such as enable & reset errors.

CNC motion controllers

There are two main types of CNC controllers:

  • Software controllers (run on PC)
  • Hardware controllers (stand alone controllers with screen, jogging buttons etc)

Mach3/Mach4

Mach3 and Mach4 are probably the most famous low cost CNC controller for Windows PC's. They can produce pulse and direction setpoint signals from PC parallel port and also via external pulse generators.

LinuxCNC

LinuxCNC is based on realtime Linux platform and offers high flexibility at expense of somewhat more complex setup process compared to others. However, due to realtime OS platform it provides very stable output on pulse and direction control as well as analog and PWM modes.

Stand-alone controllers

PLC

Programmable logic controller is usually a stand-alone device where operator can write programs to do various things, such as control I/O signals and generate motion setpoint signals. Many PLC's are motion control capable and are a suitable choice also for Granite Devices drives.

Software

Any programmable device (such PC or microcontroller) can act as controller if a suitable connection to drive is available. For example SimpleMotion V2 can be used as such connection as it provides easy connection between PC (USB or RS485) and Granite Devices motor drives.


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.