Downloading offline scope capture in Granity

From Granite Devices Knowledge Wiki
Revision as of 12:14, 7 May 2017 by Tero K (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Granity version 1.12 and later allows downloading capture graphs that were recorded offline (i.e. when drive was not connected to granity). This may be useful when diagnosing a problem that occurs rarely or is hard to reproduce under Granity connection.

Usage:

  1. Connect to a drive
  2. Setup a desired capture. Configure following values:
    1. Choose a desired trigger source such as Capture on setpoint change or Capture on fault
    2. Choose sample rate TSR
    3. Choose capture signals to be recorded
    4. Untick "Continuously repeating capture"
  3. Press Start capture
  4. Disconnect from drive and wait the capture to occur
  5. Re-connect to the device
  6. Press keyboard hotkey Alt+W to download and view the previously recorded offline capture

Example use[edit | edit source]

See Troubleshooting position control faults. You may apply offline capture to catch faults described in that page.


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.