Feedback devices

From Granite Devices Knowledge Wiki
Revision as of 12:14, 18 April 2012 by 130.230.150.235 (Talk)


Jump to: navigation, search

Feedback devices are mandatory part in closed loop systems and typically found in servo motor applications. In motion control FB devices are used to get position or velocity information from motor or machine.

Shapes

Feedback devices come mainly in two shapes:

  • Rotary
  • Linear

Shape of device doesn't change their operation principle.

Feedback device types

Encoder

Quadrature encoders are nowadays the most common feedback device type in servo motors. Quadrature encoders are incremental sensors so they require position zeroing/homing to get absolute position feedback.

Another type of encoder is absolute encoder. Absolute encoders typically output serial data of absolute position thus they may not need to be zeroed. The drawback of absolute sensors is higher price and lower compatibility & interchangeability.

Resolver/synchro

Resolver is an analog technology based on rotary transformer that can provide absolute position (single turn absolute, for multiturn absolute position zeroing is still needed). Resolvers are good for harsh conditions but don't provide as high precision as encoders.

Tachometer

Tachometer is a small DC generator that outputs DC voltage proportional to rotation speed. It can be used as velocity feedback device but not as position sensor. Tachometers are often seen in dual-loop configurations with position sensor.

Hall sensors

Hall sensors are found in AC & BLDC motors only. Halls provide commutation information (drive current phase angle) for drive. Modern drives such as all GD drives don't require Hall sensors but can utilize them to make faster power-up possible. Hall sensors are too low resolution for position or high performance velocity control.

Comparison

Device Durability Outputs available Absolute Position feedback precision Velocity feedback precision
Incremental encoder Medium Quadrature, Serial, SinCos No Medium to very high Medium to high
Absolute encoder Medium Serial, Gray signals Yes (single or multiturn) Medium to very high Medium to high
Resolver High Analog, 6 wires Yes (single turn) Medium Medium
Tachometer Medium Analog Yes (for velocity FB) N/A Medium to high
Hall Medium Digital outputs Yes (single turn) Low Low

See also


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.