Granity user guide/Goals

From Granite Devices Knowledge Wiki
Jump to: navigation, search

Granity Goals tab

The Goals tab in the GDtool 3 serves following purpses:

Parameters

[short name] Name Description How to use
CM Control mode Select drive operating control mode Select Torque, Velocity or Position mode.
CRI Setpoint input Source the of setpoint signal Choose one from Serial only (SMV2, Pulse and direction, Quadrature, PWM or Analog setpoint
CIS Setpoint smoothing Low pass filtering of setpoint signal Tick the checkbox to smoothen the setpoint signal. This is useful if setpoint is noisy or jittering. However, if fastest response to the input is desired, leave this unticked.

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.