HV DC bus

From Granite Devices Knowledge Wiki
Revision as of 15:56, 30 October 2013 by Tero K (Talk | contribs)

Jump to: navigation, search
A simplified typical motor drive high voltage circuity.

In this case the circuit has 3-phase AC input. 1-phase input is similar to this but only with four rectifier diodes instead of six.

HV DC bus refers to an internal high voltage DC supply bus of a motor drive. This voltage typically has voltage between 12 to 400 VDC depending on a drive model and is the source voltage to the power stage that actually drives current to motor windings.

In Argon the HV DC bus is generated by rectified AC input voltage, so for example with 230 VAC input the DC but voltage becomes about 325 VDC.

Some drives, such as VSD-E and VSD-XE, do not have AC power input but direct HV DC input.

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.