Difference between revisions of "IONICUBE"

Revision as of 11:56, 31 March 2015

IONICUBE
Device type	4 axis motherboard for IONI drives
Model number	IONICUBE
Supported motors	AC, DC, BLDC, Linear
Control modes	Position, Velocity, Torque
Status	Active production, started 2015
Electrical
DC supply voltage	Same as IONI specifications
General
Compliance	CE (EMC & LVD directives)
3D model	IGES, STEP, 2D PDF

IONICUBE is a 1-4 axis motherboard for IONI Servo Drives. IONICUBE provide four slots for IONI drives as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2.

Features

IONICUBE has been designed multiaxis robotic systems such as CNC machines in mind. On-board features include:

• Carry up to 4 ION drives
• On-board regenerative braking resistor
• Each axis can have mechanical end switches and homing switch
• Motor holding brake drivers for each axis
• The first 26 pin ribbon cable connector is laid out so that it’s directly connectible to traditional CNC controllers (parallel port, SmoothStepper etc).
• The second 26 pin connector has extra I/O for drives and analog setpoint inputs for custom applications
• No separate break-out-boards needed
• Charge-pump input for safety
• E-stop switch input (safe torque off)
• PWM to 0-10V converter for VFD spindle
• Two relay drivers
• ARGON Servo Drive compatible encoder connector pin-out
• RJ45 connectors for SimpleMotion V2 usage and configuration
• On-board 1.5A 5V regulator to power drive logic and feedback devices

User guide

• IONI & IONICUBE user guide
• IONICUBE connectors and pinouts
• IONICUBE encoder connector pinout

See also

• IONICUBE 1X - a single axis motherboard for IONI