Difference between revisions of "IONICUBE"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
Line 1: Line 1:
 
{{Infobox drive
 
{{Infobox drive
| name = IONI
+
| name = IONICUBE
 
| image=[[File:Ionicubesteeltable m.jpg|290px]]
 
| image=[[File:Ionicubesteeltable m.jpg|290px]]
 
| modelno = IONICUBE
 
| modelno = IONICUBE

Revision as of 16:42, 26 March 2015

IONICUBE
Ionicubesteeltable m.jpg
Device type 4 axis motherboard for IONI drives
Model number IONICUBE
Supported motors AC, DC, BLDC, Linear
Control modes Position, Velocity, Torque
Status Active production, started 2015
Electrical
DC supply voltage Same as IONI specifications
General
Compliance CE (EMC & LVD directives)
3D model

IGES, STEP, 2D PDF

Video showing three axis CNC control with IONICUBE and IONI drives

IONICUBE is a 1-4 axis motherboard for IONI Servo Drives. IONICUBE provide four slots for IONI drives as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2.

Features

IONICUBE has been designed multiaxis robotic systems such as CNC machines in mind. On-board features include:

  • Carry up to 4 ION drives
  • On-board regenerative braking resistor
  • Each axis can have mechanical end switches and homing switch
  • Motor holding brake drivers for each axis
  • The first 26 pin ribbon cable connector is laid out so that it’s directly connectible to traditional CNC controllers (parallel port, SmoothStepper etc).
  • The second 26 pin connector has extra I/O for drives and analog setpoint inputs for custom applications
  • No separate break-out-boards needed
  • Charge-pump input for safety
  • E-stop switch input (safe torque off)
  • PWM to 0-10V converter for VFD spindle
  • Two relay drivers
  • ARGON Servo Drive compatible encoder connector pin-out
  • RJ45 connectors for SimpleMotion V2 usage and configuration
  • On-board 1.5A 5V regulator to power drive logic and feedback devices

User guide