Difference between revisions of "IONI & IONICUBE user guide/List of things needed"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
 
Line 5: Line 5:
 
*1 or more RJ45 Ethernet cables (see [[SimpleMotion_V2_port|details]] & [[Argon user guide/Mating connectors and accessories|examples]])
 
*1 or more RJ45 Ethernet cables (see [[SimpleMotion_V2_port|details]] & [[Argon user guide/Mating connectors and accessories|examples]])
 
*Regulated 24 VDC power supply, output capability at least 0.5A per motherboard
 
*Regulated 24 VDC power supply, output capability at least 0.5A per motherboard
*Regulated or non-regulated 5-52 VDC power supply for motor power. Output capability depends on motor power draw. If unsure, then a good start is a power supply between 150 to 600 Watts for a multiaxis motherboard. As a reference, a typical 3 axis Nema 23 stepping motor system can be fed with a 150-200 W 48 V power supply.
+
*Regulated or non-regulated 5-52 VDC power supply for motor power. Output capability depends on motor power draw. If unsure, then a good start is a power supply between 150 to 600 Watts for a multiaxis motherboard. As a reference, a typical 3 axis Nema 23 stepping motor system can be fed with a 150-200 W 48 V power supply. See:
 +
**[[IONI power supply schemes]]
 +
**[[Estimating power need of motor drive system]]
 
*A [[IONI & IONICUBE user guide/Motor compatibility|IONI compatible motor]]
 
*A [[IONI & IONICUBE user guide/Motor compatibility|IONI compatible motor]]
 
*[[Shielded cable|Shielded power conductors]] as motor power cord. Non-shielded will also work but increase [[Electromagnetic interference|EMI]] and may be source of communication errors.
 
*[[Shielded cable|Shielded power conductors]] as motor power cord. Non-shielded will also work but increase [[Electromagnetic interference|EMI]] and may be source of communication errors.

Latest revision as of 15:27, 3 December 2015

The list of necessary things to build a working servo system with IONI
Optional but highly recommended items
  • Emergency stop button (normally closed NC type) or equivalent
Needed for high current motors (>5A average)
  • A cooling fan
Tools needed
  • Screwdrivers
  • Wire cutter
Skills needed
  • Qualified electrician skills
  • Basic knowledge of servo systems