Difference between revisions of "IONI Servo & Stepper Drive"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(Applications)
(Supported motors)
 
Line 41: Line 41:
 
*Motor voltage rating 12-60 VDC (IONI supply voltage is 5 - 52 VDC)
 
*Motor voltage rating 12-60 VDC (IONI supply voltage is 5 - 52 VDC)
 
*Motor current rating 0.1 - 25A (choose drive model accordingly, IONI Pro HC, maximum output is 25A, IONI Pro 18A, and IONI 15A)
 
*Motor current rating 0.1 - 25A (choose drive model accordingly, IONI Pro HC, maximum output is 25A, IONI Pro 18A, and IONI 15A)
*Servo motor must be equipped with an [[Feedback devices|incremental encoder]] (position sensor) with resolution of 100 to 1000000 pulses per revolution.
+
*Servo motor must be equipped with an [[Feedback devices|supported feedback device]] (position sensor / encoder).
 
See [[Motor compatibility guide]] for more details.
 
See [[Motor compatibility guide]] for more details.
 
===Stepping motor requirements===
 
===Stepping motor requirements===

Latest revision as of 08:05, 29 August 2019

IONI
Finalioni2crop.JPG
Device type Servo & stepping motor drive
Model number IONI-11K000, IONI-11K200
Supported motors AC, DC, BLDC, Linear, Stepper
Control modes Position, Velocity, Torque
Status Active production, started 2015
Electrical
DC supply voltage 5 - 54 VDC (except 5 - 58 VDC in IONI Pro HC)
Output current range 0.1 - 15A IONI, 0.1 - 18A IONI Pro, 0.1 - 25A IONI Pro HC
Setpoint signals Pulse and direction, PWM, Analog, SimpleMotion V2
Feedback devices Quadrature encoder, SinCos encoder
General
Configuration tool Granity
Web site Granite Devices IONI
Compliance CE (EMC & LVD directives)
3D model

Download-icon.png IGES & STEP

PDF version of IONI flyer. Download.

IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors). Applications of such control methods include

  • Position control, such as CNC, robotics and 3D printing
  • Velocity control, such as spindles or feeders
  • Force / torque control, such as racing simulator wheel


Ioni drive blocks.png


Commands to IONI drive can be delivered in many formats and from many sources, such as PC, PLC, microcontroller (i.e. Arduino, MBED and OEM boards) or embedded computers like Raspberry Pi. IONI understands several forms of setpoint commands:

  • Step & direction digital signals (typical stepper drive interface, good for position control)
  • Analog +/-10V signal (good for speed or torque control)
  • PWM signal (good for speed or torque control)
  • RS485 serial bus (talks SimpleMotion V2 bus protocol, open source library available)


Supported motors[edit | edit source]

As motor is not included, make sure that you have, or obtain a motor that is compatible with IONI. Learn more about motor types.

Servo motor requirements[edit | edit source]

  • Permanent magnet brush-DC, AC, brushless or linear motor
  • Motor voltage rating 12-60 VDC (IONI supply voltage is 5 - 52 VDC)
  • Motor current rating 0.1 - 25A (choose drive model accordingly, IONI Pro HC, maximum output is 25A, IONI Pro 18A, and IONI 15A)
  • Servo motor must be equipped with an supported feedback device (position sensor / encoder).

See Motor compatibility guide for more details.

Stepping motor requirements[edit | edit source]

  • Two-phase stepping motor with 0.5 - 15A current rating, no feedback device needed. Can be used in position and velocity control mode. Torque mode not possible. Stepper voltage rating is irrelevant, but generally lower voltage & higher current stepper is better.

Unsuitable/non-optimum motors[edit | edit source]

  • Any non-permanent magnet motors: induction AC motor or DC motor with field coil - will not work
  • Cheapest grade DC motor, such as one extracted from power drill - might not give satisfying performance
  • Motor with very high voltage, such as 200 VAC AC servo motor - it will work if it has incremental encoder feedback, but maximum rotation speed is limited due to drive voltage. Consider Argon servo drive for motors above 100 volts rating.

Features[edit | edit source]

State of the Art[edit | edit source]

Control[edit | edit source]

Protections & Ruggedness[edit | edit source]

  • Safe torque off
  • Prevent machine damage via I²t (motor temperature modeling), blocked motion and tracking error detection
  • Industry leading ruggedness: over current, short circuit, over voltage, under voltage and over temperature protections, data/communication error detection
  • Warranty 24 months
  • Charge pump enable input for safety

Applications[edit | edit source]

  • Industrial servo & stepping motor control
  • Robotics
  • Industry 4.0 systems
  • Testing equipment
  • CNC
  • Haptics
  • Racing & flight simulators
  • Pick'n'place machines
  • Defense systems

Functionality and specifications[edit | edit source]

See main article IONI specifications.

Documentation & user guides[edit | edit source]

See the main article IONI & IONICUBE user guide.

Availability[edit | edit source]

Shipping worldwide at Granite Devices web shop.