IONI device model comparison

From Granite Devices Knowledge Wiki
Revision as of 09:36, 1 January 2020 by Mtakala (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

The main difference between IONI and IONI Pro is that Pro model will get more advanced functions as downloadable upgrades.

Available exclusive IONI Pro features
  • SinCos 1 Vp-p encoder support
  • Motor torque cogging & ripple compensation
  • Notch filter for advanced vibration damping
  • Power consumption limit (useful with switch mode power supplies)
  • Homing function and soft travel limits that work in all control modes, not just position control mode
  • Torque mode effects: damping, friction and inertia (useful in simulator applications)
  • SimuCUBE simulator motherboard support
  • Serial encoder support
The planned IONI Pro features are


The planned features are implemented as user downlodable firmware. Firmware upgrades are free.

Comparison

The table below summarizes the full list of realized differences. All base features are available in all models. For full list of features, see IONI specifications.

Feature IONI IONI Pro IONI Pro HC
Max output current (AC/BLDC/Stepper) 15 A 18 A 25 A
Max output current (Brush DC) 23.4 A 30 A 30 A
Supply voltage range 5-52 VDC 5-52 VDC (Rev1)

5-55 VDC (Rev2)

5-55 VDC (all revisions)
Feedback device (i.e. encoder) resolution 100-15000000 P/R with incremental encoders 100-15000000 P/R with incremental encoders. For absolute serial encoder (BiSS, SSI), see details at Using serial data feedback device.
Max encoder count rate 0-4 MHz 0-18 MHz
Pulse and direction setpoint frequency 0-4 MHz 0-8 MHz
Quadrature setpoint frequency 0-1 MHz 0-2 MHz
Sin/Cos encoder support No Yes, selectable resolution interpolation factor 16X, 64X or 256X
SSI absolute encoder support No Yes
BiSS absolute encoder support No Yes
Motor torque cogging & ripple compensation (anticogging) No Yes
Notch & peaking torque filter (advanced machine resonance attenuation) No Yes
Motor homing function availability Yes, in position control mode Yes, in position, velocity and torque control modes
User definable HV DC bus power consumption limit No Yes, 1-1000 W at 1 W steps
SimuCUBE support No Yes
Torque mode effects (simulator applications) No Yes

Note: specifications and planned updates are subject to change without notice.

See also


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.