Mach4 SimpleMotion drive plugin

From Granite Devices Knowledge Wiki
Revision as of 13:48, 21 December 2017 by Jhilliaho (Talk | contribs) (The first draft)


Jump to: navigation, search

This page will be documentation for the Mach 4 SimpleMotion plugin.

Introduction

  • What is this plugin
  • What is Mach4
  • Where is this plugin needed

What is needed?

  • Atomi, IONI or Argon-based motion system, e.g. CNC mill
  • Mach4 + license

How to get it working

  • Build your machine
  • Configure the controllers
    • Position mode except in velocity-controlled spindle
  • Install Mach4
  • Copy the plugin files to the plugin folder
  • Launch Mach4
  • Select the plugin from settings
  • Restart
  • Select the plugin as motion control device

Mach4 configuration

  • Plugins
    • Simplemotion drive plugin must be checked
  • Motors
    • Counts/unit, velocity, acceleration, reverse
  • Axis mapping
    • Select motors. Numbers are different here compared to driver numbers!
    • One OB axis can be selected for being used as a velocity or position controlled spindle
    • Do not enable axes without motors
  • Homing/SoftLimits
    • Set home order
    • Home dir is selected in Granity software
  • Spindle
    • Spindle settings
    • A position controlled spindle can be selected here

Plugin configuration

  • FTDI port number
  • Buffer max fill percentage
  • Velocity-controlled spindle

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.