Difference between revisions of "Setpoint signal"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[quality revision][checked revision]
m (Text replacement - "{{param|PWM}}" to "PWM")
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
Reference signal is a signal that will be used as ''target value'' in control systems. Typical occurrencies of reference signals in GD products are:
+
[[File:Setpoint and actual.png|thumb|400px|An example setpoint signal (target value) and measured response signal (realized output value) of a control system.]]
* Position reference
+
Setpoint (a.k.a reference) signal is a signal that will be used as ''target value'' in control systems. Typical occurrencies of setpoint signals in GD products are:
* Velocity reference
+
* Position setpoint
* Torque reference
+
* Velocity setpoint
I.e. position reference value may be "1234" which could mean a target position of 1234 mm in some linear actuator. Or torque reference of 5.0 could mean that motor is asked to produce 5 Nm torque.
+
* Torque setpoint
==Physical reference signal types==
+
I.e. position setpoint value may be "1234" which could mean a target position of 1234 mm in some linear actuator. Or torque setpoint of 5.0 could mean that motor is asked to produce 5 Nm torque.
Reference signals may have several representations in real world such as:
+
==Physical setpoint signal types==
* [[Analog reference]] signal
+
Setpont signals may have several representations in real world such as:
 +
* [[Analog setpoint]] signal
 
* [[Pulse and direction]] signals
 
* [[Pulse and direction]] signals
 
* [[PWM]] signal
 
* [[PWM]] signal
 
* Serial communication command
 
* Serial communication command
  
In these cases there will be a conversion between input and output units. For example when using +/-10V reference as velocity reference, the relation betveen input to output types could be 1 Volt per 100 rpm (or any other scale).
+
In these cases there will be a conversion between input and output units. For example when using +/-10V as velocity setpoint, the relation between input to output types could be 1 Volt per 100 rpm (or any other scale).
==Reference signal characteristics==
+
==Setpoint signal characteristics==
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
!  !! [[Analog reference|Analog]] !! [[Pulse and direction|Pulse & dir]] or [[Quadrature]] !! [[PWM]] !! Network
+
!  !! [[Analog setpoint|Analog]] !! [[Pulse and direction|Pulse & dir]] or [[Quadrature]] !! [[PWM]] !! Serial / Network
 
|-
 
|-
 
| Scale & range || Absolute (limited) || Incremental (infinite) || Absolute (limited) ||  
 
| Scale & range || Absolute (limited) || Incremental (infinite) || Absolute (limited) ||  
Line 21: Line 22:
 
*Incremental (infinite)
 
*Incremental (infinite)
 
|-
 
|-
| Reference uses in motion control || Torque, velocity || Position, velocity || Torque, velocity || Position, torque, velocity
+
| Setpoint uses in motion control || Torque, velocity || Position, velocity || Torque, velocity || Position, torque, velocity, parameters
 
|-
 
|-
 
| Pros  
 
| Pros  
Line 37: Line 38:
 
*High resolution & accuracy
 
*High resolution & accuracy
 
*Reduce wiring
 
*Reduce wiring
*More functions than just reference
+
*More functions than just setpoint
 
|-  
 
|-  
 
|Cons
 
|Cons
Line 53: Line 54:
 
|}
 
|}
 
[[Category:Signals]]
 
[[Category:Signals]]
 +
[[Category:Glossary]]

Latest revision as of 19:59, 28 August 2015

An example setpoint signal (target value) and measured response signal (realized output value) of a control system.

Setpoint (a.k.a reference) signal is a signal that will be used as target value in control systems. Typical occurrencies of setpoint signals in GD products are:

  • Position setpoint
  • Velocity setpoint
  • Torque setpoint

I.e. position setpoint value may be "1234" which could mean a target position of 1234 mm in some linear actuator. Or torque setpoint of 5.0 could mean that motor is asked to produce 5 Nm torque.

Physical setpoint signal types[edit | edit source]

Setpont signals may have several representations in real world such as:

In these cases there will be a conversion between input and output units. For example when using +/-10V as velocity setpoint, the relation between input to output types could be 1 Volt per 100 rpm (or any other scale).

Setpoint signal characteristics[edit | edit source]

Analog Pulse & dir or Quadrature PWM Serial / Network
Scale & range Absolute (limited) Incremental (infinite) Absolute (limited)
  • Absolute (near infinite)
  • Incremental (infinite)
Setpoint uses in motion control Torque, velocity Position, velocity Torque, velocity Position, torque, velocity, parameters
Pros
  • Widely used
  • Easy to measure
  • Widely used
  • Exact
  • Noise robust
  • EMI noise robust
  • Precise
  • High resolution & accuracy
  • Reduce wiring
  • More functions than just setpoint
Cons
  • EMI noise sensitive
  • Offset & gain errors
  • Limited resolution at low frequency
  • Need reference zeroing because incremental
  • Various "standards", sometimes incompatible
  • Many standards
  • Usually incompatible with other standards