Difference between revisions of "SimpleMotion V2 port"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(Electrical properties)
Line 5: Line 5:
 
==Electrical properties==
 
==Electrical properties==
 
SimpleMotion V2 uses [[Wikipedia:RS485|RS485]] electrical serial communication standard for all data transfer. Some main benefits of using RS485 are:
 
SimpleMotion V2 uses [[Wikipedia:RS485|RS485]] electrical serial communication standard for all data transfer. Some main benefits of using RS485 are:
* Low wire count, only 2 signal wires + ground needed
 
* Bidirectional data transfer (receive & transmit) in one wire pair
 
 
* Multidrop buses possible (up to 32 devices in single serial link)
 
* Multidrop buses possible (up to 32 devices in single serial link)
 
* High reliability due to differential signaling
 
* High reliability due to differential signaling
 
* High data rates and long cable lengths possible
 
* High data rates and long cable lengths possible
 
* Easy to interface even from smallest microcontrollers with [[Wikipedia:Universal_asynchronous_receiver/transmitter|UART]]
 
* Easy to interface even from smallest microcontrollers with [[Wikipedia:Universal_asynchronous_receiver/transmitter|UART]]
 +
* Low wire count, only 2 signal wires + ground needed
 +
* Bidirectional data transfer (receive & transmit) in one wire pair
 
As default SimpleMotion V2 uses 460800 BPS bitrate.
 
As default SimpleMotion V2 uses 460800 BPS bitrate.
 +
 
==Use as E-stop input==
 
==Use as E-stop input==
 
[[File:multidrop_estop.png|thumb|SM V2 multidrop bus with E-stop functionality]]In Argon drive, the same connector acts also as emergencecy stop or [[Safe torque off]] input. User may connect a e-stop button directly at the end of device chain to gain reliable stopping mechanism for all linked devices.
 
[[File:multidrop_estop.png|thumb|SM V2 multidrop bus with E-stop functionality]]In Argon drive, the same connector acts also as emergencecy stop or [[Safe torque off]] input. User may connect a e-stop button directly at the end of device chain to gain reliable stopping mechanism for all linked devices.

Revision as of 21:33, 13 December 2012

RJ45 cable compatible with Ethernet and SimpleMotion V2

SimpleMotion V2 communication link and Argon drives use RJ45 connectors and cables as physical connection standard.

RJ45 is well known from Ethernet connectors and same cables may be used with SimpleMotion wiring.

Electrical properties

SimpleMotion V2 uses RS485 electrical serial communication standard for all data transfer. Some main benefits of using RS485 are:

  • Multidrop buses possible (up to 32 devices in single serial link)
  • High reliability due to differential signaling
  • High data rates and long cable lengths possible
  • Easy to interface even from smallest microcontrollers with UART
  • Low wire count, only 2 signal wires + ground needed
  • Bidirectional data transfer (receive & transmit) in one wire pair

As default SimpleMotion V2 uses 460800 BPS bitrate.

Use as E-stop input

SM V2 multidrop bus with E-stop functionality
In Argon drive, the same connector acts also as emergencecy stop or Safe torque off input. User may connect a e-stop button directly at the end of device chain to gain reliable stopping mechanism for all linked devices.

Connector pinout

RJ45 cable pinout
Pin # Signal name Description
1 CANL (reserved) CAN bus possibility for future use
2 CANH (reserved) CAN bus possibility for future use
3 RS485_A RS485 signal A
4 Reserved Do not connect
5 E_STOP Connect normally closed E-stop button switch between pins 5 and 8
6 RS485_B RS485 signal B
7 Reserved Do not connect
8 GND Ground reference for RS485 and E_STOP