Difference between revisions of "Using serial data feedback device"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
 
Line 5: Line 5:
 
=== Configuration & compatibility guides ===
 
=== Configuration & compatibility guides ===
 
* BiSS - [[Using BiSS encoder]]
 
* BiSS - [[Using BiSS encoder]]
* SSI - TODO
+
* SSI - [[Using SSI encoder]]
* AMS SSI - TODO
+
 
To find out more about compatibility, check also drive specification pages (i.e. [[IONI specifications]]).
 
To find out more about compatibility, check also drive specification pages (i.e. [[IONI specifications]]).
 
[[Category:Setup guides]]
 
[[Category:Setup guides]]
 
[[Category:IONI user guide]]
 
[[Category:IONI user guide]]
 
[[Category:Granity user guide]]
 
[[Category:Granity user guide]]

Latest revision as of 22:17, 9 May 2017

Serial data encoder is an position feedback device that uses any form of serial communication to transfer position data. Typical de-facto stadanrds for such serial protocols include BiSS, SSI, SPI and EnDat. However, most of these standards are loosely defined which makes makes configuration not as straight forward as it could ideally be. This page lists instructions to configure various type of serial data encoders.

Configuration & compatibility guides[edit | edit source]

To find out more about compatibility, check also drive specification pages (i.e. IONI specifications).