Difference between revisions of "VSD-E and VSD-XE"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(Specifications)
Line 76: Line 76:
 
| Control modes || Torque, Velocity, Position ||Torque, Velocity, Position
 
| Control modes || Torque, Velocity, Position ||Torque, Velocity, Position
 
|-
 
|-
| [[Reference signal]] types|| [[Pulse and direction]], [[quadrature]], [[Analog reference|+/-10V]], SPI, [[PWM]]||[[Pulse and direction]], [[quadrature]], [[Analog reference|+/-10V]], SPI, [[PWM]]
+
| [[Reference signal]] types|| [[Pulse and direction]], [[quadrature]], [[Analog reference|+/-10V]], [[SPI]], [[PWM]]||[[Pulse and direction]], [[quadrature]], [[Analog reference|+/-10V]], [[SPI]], [[PWM]]
 
|-  
 
|-  
 
| Support DualDC || Yes || Yes
 
| Support DualDC || Yes || Yes

Revision as of 11:17, 18 April 2012

VSD-E and VSD-XE
VSD-EXE-160-w430.jpg
Device type Servo motor drive
Supported motors AC, DC, BLDC, Stepper (partial)
Control modes Position, Velocity, Torque
Status Active production
Electrical
DC supply voltage 12 - 160 VDC
Output current range 0.1 - 40A
Setpoint signals Pulse and direction, PWM, Quadrature, Analog, SPI
Feedback devices Quadrature encoder
General
Configuration tool

GDtool 2.5 and DCtool

VSD-E/XE drive is a versatile servo drive from Granite Devices.

Applications

Motion control

  • Robotics
  • CNC
  • Pick'n'place
  • Precise speed,torque or position control
  • Actuators
  • 3D printers

Other uses

VSD-E series has been successfully used also in non-motion related applications mainly in torque mode (a.k.a. current control mode). In these applications a LC filter has been used after drive to smoothen out the PWM output.

Key features

Single axis a.k.a Evolution mode

List of key features:

  • Easy setup via GDtool software
  • SimpleMotion control library for PC, C/C++/C#, LabVIEW etc
  • Various low level command inputs (pulse/dir, PWM, quadrature, ±10V)
  • Easy connection to fieldbuses like EtherCAT or CANopen (more info)
  • Most AC/BLDC/DC and linear servo motors supported
  • Advanced sinusoidal field oriented control (FOC)
  • True current control protects equipment and boosts responsiveness
  • Reliability guaranteed by wide safety margins and quality components
  • Electrical & mechanical braking of motor in faults & disable
  • Fully automatic internal homing controller
  • Optimized for CNC and machine automation
  • Robust 200V 60A MOSFET power stage
  • Panel installation, 19" rack compatible.
  • Regenerative brake resistor output
  • Hard to kill: short circuit, over current, over temperature, I²t, over voltage and under voltage protections
  • Advanced positioning with acceleration limit and smoothing

See also:

DualDC mode

A special feature of VSD-E/XE is that it can control two indepdendent brush DC servo motors on single drive. This mode is achieved by downloading a freerly available DualDC firmware to the drive. DualDC mode has several restrictions compared to single axis mode due to hardware limitations.

Purchasing

Before purchase

Before purchasing the drive, it is suggested to:

  • Ensure product suitability for your needs:
  • Make clear what additional items will be needed, such as power supplies and possibly interface electronics
  • If unsure about suitability, please send inquiry to Granite Devices support to be sure

How to purchase

VSD-E base price in single quantities is €199 and VSD-XE €243 excluding VAT. Both models are currently under active production and can be purchased from GD Web shop or from any GD distributor.

Specifications

VSD-E VSD-XE
Supported motors AC, BLDC, DC (and stepper preliminary) AC, BLDC, DC (and stepper preliminary)
Supported feedback devices Quadrature encoder & Hall sensors Quadrature encoder & Hall sensors
Control modes Torque, Velocity, Position Torque, Velocity, Position
Reference signal types Pulse and direction, quadrature, +/-10V, SPI, PWM Pulse and direction, quadrature, +/-10V, SPI, PWM
Support DualDC Yes Yes
Voltage range 12-160VDC 12-160VDC
Continuous output current range for AC/BLDC 0.1-10A 0.1-14A
Continuous output current range for DC 0.1-14A 0.1-18A
Peak output current range for AC/BLDC 0.1-20A 0.1-20A
Peak output current range for DC 0.1-40A 0.1-40A
Standard warranty 1 year 2 years

For detailed specifications and supported motor types, please see the VSD-E/XE manual (PDF)

Setup & documentation