Difference between revisions of "VSD-E and VSD-XE"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[quality revision][checked revision]
(How to purchase)
 
(10 intermediate revisions by one other user not shown)
Line 4: Line 4:
 
| motors = AC, DC, BLDC, <small>(Stepper partially)</small>
 
| motors = AC, DC, BLDC, <small>(Stepper partially)</small>
 
| controlmodes = Position, Velocity, Torque
 
| controlmodes = Position, Velocity, Torque
| production = Active production
+
| production = NRND (Not recommended for new designs), see [[Argon (servo drive)|Argon]]
 
| voltage = 12 - 160 VDC
 
| voltage = 12 - 160 VDC
 
| currentrange = 0.1 - 40A  
 
| currentrange = 0.1 - 40A  
 +
| production = Discontinued
 
| feedbacksignals=[[Quadrature]] encoder
 
| feedbacksignals=[[Quadrature]] encoder
 
| referencesignals=[[Pulse and direction]], [[PWM]], [[Quadrature]], [[Analog reference|Analog]], [[SPI]]
 
| referencesignals=[[Pulse and direction]], [[PWM]], [[Quadrature]], [[Analog reference|Analog]], [[SPI]]
Line 14: Line 15:
 
}}
 
}}
  
VSD-E/XE drive is a versatile servo drive from Granite Devices.  
+
VSD-E/XE drive is a versatile servo drive from Granite Devices. In favor of [[ARGON]] and [[IONI]] servo drives, VSD-E series became discontinued. Regardless of being discontinued in production, it is still being supported and repair & spare service is available.  
  
 
==Applications==
 
==Applications==
Line 61: Line 62:
 
* Ensure product suitability for your needs:
 
* Ensure product suitability for your needs:
 
** See [http://granitedevices.fi/assets/files/vsd-e_160_manual.pdf VSD-E/XE PDF manual chapter 13] for supported motor and feedback device types
 
** See [http://granitedevices.fi/assets/files/vsd-e_160_manual.pdf VSD-E/XE PDF manual chapter 13] for supported motor and feedback device types
** Check if a compatible [[reference signal]] is available from your [[Controller|controller]]
+
** Check if a compatible [[setpoint signal]] is available from your [[Controller|controller]]
 
** Read through the drive manual to understand the product and requirements better
 
** Read through the drive manual to understand the product and requirements better
 
* Make clear what additional items will be needed, such as power supplies and possibly interface electronics
 
* Make clear what additional items will be needed, such as power supplies and possibly interface electronics
Line 67: Line 68:
  
 
===How to purchase===
 
===How to purchase===
VSD-E base price in single quantities is €199 and VSD-XE €243 excluding [http://en.wikipedia.org/wiki/Value_added_tax VAT]. Both models are currently under active production and can be purchased from [http://granitedevices.mycashflow.fi/category/4/drive-electronic GD Web shop] or from any [http://granitedevices.fi/index.php?q=how-to-buy GD distributor].
+
VSD series is discontinued and not available anymore. Large quantities can be negotiated separately.
 +
 
 
==Model comparison==
 
==Model comparison==
 
{| class="wikitable"
 
{| class="wikitable"
Line 79: Line 81:
 
| [[Control modes]] || Torque, Velocity, Position ||Torque, Velocity, Position
 
| [[Control modes]] || Torque, Velocity, Position ||Torque, Velocity, Position
 
|-
 
|-
| [[Reference signal]] types|| [[Pulse and direction]], [[quadrature]], [[Analog reference|+/-10V]], [[SPI]], [[PWM]]||[[Pulse and direction]], [[quadrature]], [[Analog reference|+/-10V]], [[SPI]], [[PWM]]
+
| [[Setpoint signal]] types|| [[Pulse and direction]], [[quadrature]], [[Analog setpoint|+/-10V]], [[SPI]], [[PWM]]||[[Pulse and direction]], [[quadrature]], [[Analog setpoint|+/-10V]], [[SPI]], [[PWM]]
 
|-  
 
|-  
 
| Support DualDC || Yes || Yes
 
| Support DualDC || Yes || Yes
Line 105: Line 107:
 
*GDTool manual & Tuning guide available from GDtool 2.5 Help menu
 
*GDTool manual & Tuning guide available from GDtool 2.5 Help menu
  
 
+
[[Category:Downloads]]
[[Category:Hardware]]
+
[[Category:Motor_drives]]
[[Category:Motor drives]]
+
[[Category:VSD-E/XE]]

Latest revision as of 10:17, 5 June 2019

VSD-E and VSD-XE
VSD-EXE-160-w430.jpg
Device type Servo motor drive
Supported motors AC, DC, BLDC, (Stepper partially)
Control modes Position, Velocity, Torque
Status Discontinued
Electrical
DC supply voltage 12 - 160 VDC
Output current range 0.1 - 40A
Setpoint signals Pulse and direction, PWM, Quadrature, Analog, SPI
Feedback devices Quadrature encoder
Protections Short circuit, over current, over temperature, I²t, over voltage, under voltage, DC motor runaway, serial communication error
General
Configuration tool GDtool 2.5 and DCtool
Web site

Product site

VSD-E/XE drive is a versatile servo drive from Granite Devices. In favor of ARGON and IONI servo drives, VSD-E series became discontinued. Regardless of being discontinued in production, it is still being supported and repair & spare service is available.

Applications[edit | edit source]

Motion control[edit | edit source]

  • Robotics
  • CNC
  • Pick'n'place
  • Precise speed,torque or position control
  • Actuators
  • 3D printers

Other uses[edit | edit source]

VSD-E series has been successfully used also in non-motion related applications mainly in torque mode (a.k.a. current control mode). In these applications a LC filter has been used after drive to smoothen out the PWM output.

Key features[edit | edit source]

Single axis a.k.a Evolution mode[edit | edit source]

Simplified VSD drive block diagram in position control mode.

List of key features:

  • Easy setup via GDtool software
  • SimpleMotion control library for PC, C/C++/C#, LabVIEW etc
  • Various low level command inputs (pulse/dir, PWM, quadrature, ±10V)
  • Easy connection to fieldbuses like EtherCAT or CANopen (more info)
  • Most AC/BLDC/DC and linear servo motors supported
  • Advanced sinusoidal field oriented control (FOC)
  • True current control protects equipment and boosts responsiveness
  • Reliability guaranteed by wide safety margins and quality components
  • Electrical & mechanical braking of motor in faults & disable
  • Fully automatic internal homing controller
  • Optimized for CNC and machine automation
  • Robust 200V 60A MOSFET power stage
  • Panel installation, 19" rack compatible.
  • Regenerative brake resistor output
  • Hard to kill: short circuit, over current, over temperature, I²t, over voltage and under voltage protections
  • Advanced positioning with acceleration limit and smoothing

See also:

DualDC mode[edit | edit source]

A special feature of VSD-E/XE is that it can control two independent brush DC servo motors on single drive. This mode is achieved by downloading a freely available DualDC firmware to the drive. DualDC mode has several restrictions compared to single axis mode due to hardware limitations.

Purchasing[edit | edit source]

Before purchase[edit | edit source]

Before purchasing the drive, it is suggested to:

  • Ensure product suitability for your needs:
  • Make clear what additional items will be needed, such as power supplies and possibly interface electronics
  • If unsure about suitability, please send inquiry to Granite Devices support to be sure

How to purchase[edit | edit source]

VSD series is discontinued and not available anymore. Large quantities can be negotiated separately.

Model comparison[edit | edit source]

VSD-E VSD-XE
Supported motors AC, BLDC, DC (and stepper preliminary) AC, BLDC, DC (and stepper preliminary)
Supported feedback devices Quadrature encoder & Hall sensors Quadrature encoder & Hall sensors
Control modes Torque, Velocity, Position Torque, Velocity, Position
Setpoint signal types Pulse and direction, quadrature, +/-10V, SPI, PWM Pulse and direction, quadrature, +/-10V, SPI, PWM
Support DualDC Yes Yes
Voltage range 12-160VDC 12-160VDC
Continuous output current range for AC/BLDC 0.1-10A 0.1-14A
Continuous output current range for DC 0.1-14A 0.1-18A
Peak output current range for AC/BLDC 0.1-20A 0.1-20A
Peak output current range for DC 0.1-40A 0.1-40A
Standard warranty 1 year 2 years

For detailed specifications and supported motor types, please see the VSD-E/XE manual (PDF)

Setup & documentation[edit | edit source]