Editing IONI connector pinout

IONI card edge connector fits into a standard PCI-Express 8X socket connector. The pinout of IONI drive is provided in the following table.

{| class="wikitable"
! Pin!!Signal name
|rowspan=28|
!Pin!!Signal name
|-
| A1||GND||B1||5V_IN
|-
| A2||RS485_A||B2||RS485_B
|-
| A3||ADDRSEL1||B3||ADDRSEL2
|-
| A4||HSIN1||B4||HSIN2
|-
| A5||ANAIN-||B5||ANAIN+
|-
| A6||GPI1||B6||GPI2
|-
| A7||GPI3||B7||GPI4
|-
| A8||GPO1||B8||GPO2
|-
| A9||GPO3||B9||GPO4
|-
| A10||GPO5||B10||GPO6
|-
| A11||REGEN_OUT||B11||MECH_BRAKE_OUT
|-
| A12||ENABLE_IN||B12||Reserved/NC
|-
| A13||STO2||B13||HALL_W
|-
| A14||HALL_V||B14||HALL_U
|-
| A15||CHA-||B15||CHA+
|-
| A16||CHB-||B16||CHB-
|-
| A17||CHC-||B17||CHC-
|-
| A18-A22||GND||B18||Not connected
|-
| A23||Not connected||B19-B22||HV+
|-
| A24-A27||PHASE1||B23||Not connected
|-
| A28||Not connected||B24-B27||PHASE2
|-
| A29-A37||PHASE3||B28||Not connected
|-
| A38||Not connected||B29-B37||PHASE4
|-
| A39-A43||PHASE1||B38||Not connected
|-
| A44||Not connected||B39-B43||PHASE2
|-
| A45-A49||GND||B44||Not connected
|-
| ||||B45-B49||HV+
|}
Note: pins marked as ''Not connected'' are left empty for to make larger clearance for high voltage signals. Leave these pins unconnected on motherboard designs.