Editing Assembling SimuCUBE 480W/720W kit
Your changes will be displayed to readers once an authorized user accepts them. (help) |
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.
The edit can be undone.
Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 1: | Line 1: | ||
− | + | [[File:Simucube assembly 480w 720w.jpg|thumb|Assembled 480/720W SimuCUBE system. Assembling this is the goal of this document.]] | |
This guide gives instructions of assembling a Granite Devices SimuCUBE kit for 480W/720W power supply options. The kit of needed parts is available through [[Granite Devices web shop]] and also has been offered through [https://www.indiegogo.com/projects/simucube-force-feedback-from-the-future#/ SimuCUBE Indiegogo launch campaign]. | This guide gives instructions of assembling a Granite Devices SimuCUBE kit for 480W/720W power supply options. The kit of needed parts is available through [[Granite Devices web shop]] and also has been offered through [https://www.indiegogo.com/projects/simucube-force-feedback-from-the-future#/ SimuCUBE Indiegogo launch campaign]. | ||
See also [[SimuCUBE|List of SimuCUBE documentation]] for 320W model kit assembly instructions and other guides. | See also [[SimuCUBE|List of SimuCUBE documentation]] for 320W model kit assembly instructions and other guides. | ||
− | |||
==Tools and parts needed== | ==Tools and parts needed== | ||
Line 17: | Line 16: | ||
* 7 pcs acrylic pieces for the case | * 7 pcs acrylic pieces for the case | ||
* 1 pcs Meanwell NDR-480 or SDR-480 power supply | * 1 pcs Meanwell NDR-480 or SDR-480 power supply | ||
− | * | + | * 4 pcs M3x6 button head screw |
− | * 6 pcs | + | * 6 pcs M3x10 button head screw |
* 2 pcs M3x10 countersunk screw | * 2 pcs M3x10 countersunk screw | ||
* 4 pcs M4x16 socket screw | * 4 pcs M4x16 socket screw | ||
Line 24: | Line 23: | ||
* 2 pcs M3 locking nut | * 2 pcs M3 locking nut | ||
* 4 pcs M4 locking nut | * 4 pcs M4 locking nut | ||
− | * | + | * 2 pcs threaded 10mm brass cubes |
* 1 pc Schurter DC11.00001.003 IEC power socket ({{farnell|1207680}}, {{digikey|486-1963-ND}}) | * 1 pc Schurter DC11.00001.003 IEC power socket ({{farnell|1207680}}, {{digikey|486-1963-ND}}) | ||
* 1 pc 80x80x25mm cooling fan capable of starting at 5V | * 1 pc 80x80x25mm cooling fan capable of starting at 5V | ||
Line 92: | Line 91: | ||
6) Connect grounding and mains wires to the power supply's screw terminal. Cut wires approx 13 cm long (total length with crimp ferrules becomes approx 13 cm). | 6) Connect grounding and mains wires to the power supply's screw terminal. Cut wires approx 13 cm long (total length with crimp ferrules becomes approx 13 cm). | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
{| class="wikitable" | {| class="wikitable" | ||
Line 126: | Line 117: | ||
|} | |} | ||
− | 10) Attach positive (+48VDC), negative and grounding wires between the power supply output and motherboard terminals. Crimp the fork terminal on the other end of the grounding cable and do a pull test to make sure it is crimped well. Cut the earthing wire approx 13 cm long (total length with crimp connectors becomes approx 14 cm). | + | 10) Attach positive (+48VDC), negative and grounding wires between the power supply output and motherboard terminals. Crimp the fork terminal on the other end of the grounding cable and do a pull test to make sure it is crimped well. Cut the earthing wire approx 13 cm long (total length with crimp connectors becomes approx 14 cm). |
− | + | ||
− | + | ||
{| class="wikitable" | {| class="wikitable" | ||
Line 161: | Line 150: | ||
{{Next|[[SimuCUBE end-user guide]]}} | {{Next|[[SimuCUBE end-user guide]]}} | ||
− | |||
− | |||
− |