Setpoint signal

From Granite Devices Knowledge Wiki
Jump to: navigation, search
An example setpoint signal (target value) and measured response signal (realized output value) of a control system.

Setpoint (a.k.a reference) signal is a signal that will be used as target value in control systems. Typical occurrencies of setpoint signals in GD products are:

  • Position setpoint
  • Velocity setpoint
  • Torque setpoint

I.e. position setpoint value may be "1234" which could mean a target position of 1234 mm in some linear actuator. Or torque setpoint of 5.0 could mean that motor is asked to produce 5 Nm torque.

Physical setpoint signal types[edit | edit source]

Setpont signals may have several representations in real world such as:

In these cases there will be a conversion between input and output units. For example when using +/-10V as velocity setpoint, the relation between input to output types could be 1 Volt per 100 rpm (or any other scale).

Setpoint signal characteristics[edit | edit source]

Analog Pulse & dir or Quadrature PWM Serial / Network
Scale & range Absolute (limited) Incremental (infinite) Absolute (limited)
  • Absolute (near infinite)
  • Incremental (infinite)
Setpoint uses in motion control Torque, velocity Position, velocity Torque, velocity Position, torque, velocity, parameters
Pros
  • Widely used
  • Easy to measure
  • Widely used
  • Exact
  • Noise robust
  • EMI noise robust
  • Precise
  • High resolution & accuracy
  • Reduce wiring
  • More functions than just setpoint
Cons
  • EMI noise sensitive
  • Offset & gain errors
  • Limited resolution at low frequency
  • Need reference zeroing because incremental
  • Various "standards", sometimes incompatible
  • Many standards
  • Usually incompatible with other standards

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.