Difference between revisions of "Simucube Wireless Wheel 2"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[unchecked revision][unchecked revision]
(Created page with " Category:Hardware")
 
Line 1: Line 1:
 +
{{Infobox electric device
 +
| name  = Wireless Wheel 2 Module
 +
| image =[[File:Wireless_Wheel_2_Module.jpg|300px]]
 +
}}
  
 +
 +
=Analog inputs=
 +
[[File:SLEEP_pin_controlled_output.png|250px|right|SLEEP pin with transistors can be used to turn external devices on and off ]]
 +
Wireless module offers AVCC output for analog devices. Output in AVCC is pulsed for lower power consumption and output is on only when the ADC module is sampling inputs. Output pulses are 2ms long and frequency is 100Hz, this means that AVCC is on 20% of time. 2ms pulses work great with potentiometers, but Hall-effect sensors might not work with pulsed AVCC if Hall-sensor power-on time is too long. One option to provide VCC for Hall-sensor is to power it from Wireless Wheel 2 VDD pin and use MOSFETs connected to SLEEP pin so Hall-sensor can be powered off while Wireless Wheel 2 isn’t connected. SLEEP pin is high when Wireless Wheel 2 is connected to Simucube.
 +
 +
= Pinout =
 +
 +
Wireless Wheel 2 Module uses M.2 connectors
 +
 +
==Left M.2 connector==
 +
{| class="wikitable"
 +
|-
 +
! colspan="3" | Bottom side !! colspan="3" | Top side
 +
|-
 +
! Function !! Signal !! colspan="2" | Pin !! Signal !! Function
 +
|-
 +
| GND || GND || 66 || 67 || AVCC || 3.0 V OUTPUT to analog circuitry<br>Max. 100 mA including VDD current.
 +
|-
 +
| GND || GND || 64 || 65 || AN0 || ADC CH0 INPUT<br>0 .. 3.0 V voltage range
 +
|-
 +
| GND || GND || 62 || 63 || AN1 || ADC CH1 INPUT<br>0 .. 3.0 V voltage range
 +
|-
 +
| GND || GND || 60 || 61 || AN2 || ADC CH2 INPUT<br>0 .. 3.0 V voltage range
 +
|-
 +
| Input || BTN64 || 58 || 59 || AN3 || ADC CH3 INPUT<br>0 .. 3.0 V voltage range
 +
|-
 +
| Input || BTN63 || 56 || 57 || BTN1 || Input
 +
|-
 +
| Input || BTN62 || 54 || 55 || BTN2 || Input
 +
|-
 +
| Input || BTN61 || 52 || 53 || BTN3 || Input
 +
|-
 +
| Input || BTN60 || 50 || 51 || BTN4 || Input
 +
|-
 +
| Input || BTN89 || 48 || 49 || BTN5 || Input
 +
|-
 +
| Input || BTN58 || 46 || 47 || BTN6 || Input
 +
|-
 +
| Input || BTN57 || 44 || 45 || BTN7 || Input
 +
|-
 +
| Input || BTN56 || 42 || 43 || BTN8 || Input
 +
|-
 +
| Input || BTN55 || 40 || 41 || BTN9 || Input
 +
|-
 +
| Input || BTN54 || 38 || 39 || BTN10 || Input
 +
|-
 +
| Input || BTN53 || 36 || 37 || BTN11 || Input
 +
|-
 +
| Input || BTN52 || 34 || 35 || BTN12 || Input
 +
|-
 +
| Input || BTN51 || 32 || 33 || BTN13 || Input
 +
|-
 +
| Input || BTN50 || 30 || 31 || BTN14 || Input
 +
|-
 +
| Input || BTN49 || 28 || 29 || BTN15 || Input
 +
|-
 +
| GND || GND || 26 || 27 || BTN16 || Input
 +
|-
 +
| Input || BTN80 || 24 || 25 || GND || GND
 +
|-
 +
| Input || BTN78 || 22 || 23 || BTN79 || Input
 +
|-
 +
| Input || BTN76 || 20 || 21 || BTN77 || Input
 +
|-
 +
| Input || BTN74 || 18 || 19 || BTN75 || Input
 +
|-
 +
| Input || BTN72 || 16 || 17 || BTN73 || Input
 +
|-
 +
| Input || BTN70 || 14 || 15 || BTN71 || Input
 +
|-
 +
| Input || BTN68 || 12 || 13 || BTN69 || Input
 +
|-
 +
| Input || BTN66 || 10 || 11 || BTN67 || Input
 +
|-
 +
| Input || BTN17 || 8 || 9 || BTN65 || Input
 +
|-
 +
| Input || BTN19 || 6 || 7 || BTN18 || Input
 +
|-
 +
| Input || BTN32 || 4 || 5 || LED1 || 3.0 V status LED OUTPUT<br>through 220 Ohm series resistor
 +
|-
 +
| Input || BTN30 || 2 || 3 || BTN20 || Input
 +
|-
 +
| - || - || - || 1 || BTN31 || Input
 +
|}
 +
 +
==Right M.2 connector==
 +
{| class="wikitable"
 +
|-
 +
! colspan="3" | Bottom side !! colspan="3" | Top side
 +
|-
 +
! Function !! Signal !! colspan="2" | Pin !! Signal !! Function
 +
|-
 +
| Input || BTN28 || 66 || 67 || BTN29 || Input
 +
|-
 +
| Input || BTN26 || 64 || 65 || BTN27 || Input
 +
|-
 +
| Input || BTN22 || 62 || 63 || BTN25 || Input
 +
|-
 +
| Input || BTN24 || 60 || 61 || BTN21 || Input
 +
|-
 +
| Do not connect || - || 58 || 59 || BTN23 || Input
 +
|-
 +
| Do not connect || - || 56 || 57 || - || Do not connect
 +
|-
 +
| Input || BTN96 || 54 || no | 55 || no | - || no | Do not connect
 +
|-
 +
| Input || BTN95 || 52 || no | 53 || no | - || no | Do not connect
 +
|-
 +
| Input || BTN94 || 50 || no | 51 || no | - || no | Do not connect
 +
|-
 +
| Input || BTN93 || 48 || no | 49 || no | - || no | Do not connect
 +
|-
 +
| Input || BTN92 || 46 || 47 || SLEEP || BP2 module sleep status<br>Active LOW (BP2 sleeps)
 +
|-
 +
| Input || BTN91 || 44 || 45 || TX || LEUART TX signal OUTPUT
 +
|-
 +
| Input || BTN90 || 42 || 43 || RX || LEUART RX signal INPUT
 +
|-
 +
| Input || BTN89 || 40 || 41 || LED2 || 2nd indicator LED OUTPUT<br>3.0 V through 220 Ohm resistor
 +
|-
 +
| Input || BTN88 || 38 || 39 || PADDLE1 || Paddle input 1
 +
|-
 +
| Input || BTN87 || 36 || 37 || PADDLE2 || Paddle input 2
 +
|-
 +
| Input || BTN86 || 34 || 35 || GND || GND
 +
|-
 +
| Input || BTN85 || 32 || 33 || VDD || +3.0 V OUTPUT<br>Max. 100 mA including AVCC current.
 +
|-
 +
| Input || BTN84 || 30 || 31 || BTN33 || Input
 +
|-
 +
| Input || BTN83 || 28 || 29 || BTN34 || Input
 +
|-
 +
| Input || BTN82 || 26 || 27 || BTN35 || Input
 +
|-
 +
| Input || BTN81 || 24 || 25 || BTN36 || Input
 +
|-
 +
| GND || GND || 22 || 23 || BTN37 || Input
 +
|-
 +
| GND || GND || 20 || 21 || BTN38 || Input
 +
|-
 +
| LED indicator for battery charging<br>Connect LED Anode to BATT || LED_CHG || 18 || 19 || BTN39 || Input
 +
|-
 +
| rowspan="2"| SWITCH_IN operating voltage input || BATT || 16 || 17 || BTN40 || Input
 +
|-
 +
| BATT || 14 || 15 || BTN41 || Input
 +
|-
 +
| rowspan="2"| LiPO/Ion/battery positive terminal || BATT+ || 12 || 13 || BTN42 || Input
 +
|-
 +
| BATT+ || 10 || 11 || BTN43 || Input
 +
|-
 +
| rowspan="2"| GND || GND ||  8 ||  9 || BTN44 || Input
 +
|-
 +
| GND ||  6 ||  7 || BTN45 || Input
 +
|-
 +
| rowspan="2"| Voltage INPUT terminal<br>5.0 V ± 5 % || VIN ||  4 ||  5 || BTN46 || Input
 +
|-
 +
| VIN ||  2 ||  3 || BTN47 || Input
 +
|-
 +
|    - ||    - ||  - ||  1 || BTN48 || Input
 +
|}
 +
 +
[[Category:Hardware]]
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]

Revision as of 09:15, 19 August 2021

Wireless Wheel 2 Module

Wireless Wheel 2 Module.jpg


Analog inputs

SLEEP pin with transistors can be used to turn external devices on and off

Wireless module offers AVCC output for analog devices. Output in AVCC is pulsed for lower power consumption and output is on only when the ADC module is sampling inputs. Output pulses are 2ms long and frequency is 100Hz, this means that AVCC is on 20% of time. 2ms pulses work great with potentiometers, but Hall-effect sensors might not work with pulsed AVCC if Hall-sensor power-on time is too long. One option to provide VCC for Hall-sensor is to power it from Wireless Wheel 2 VDD pin and use MOSFETs connected to SLEEP pin so Hall-sensor can be powered off while Wireless Wheel 2 isn’t connected. SLEEP pin is high when Wireless Wheel 2 is connected to Simucube.

Pinout

Wireless Wheel 2 Module uses M.2 connectors

Left M.2 connector

Bottom side Top side
Function Signal Pin Signal Function
GND GND 66 67 AVCC 3.0 V OUTPUT to analog circuitry
Max. 100 mA including VDD current.
GND GND 64 65 AN0 ADC CH0 INPUT
0 .. 3.0 V voltage range
GND GND 62 63 AN1 ADC CH1 INPUT
0 .. 3.0 V voltage range
GND GND 60 61 AN2 ADC CH2 INPUT
0 .. 3.0 V voltage range
Input BTN64 58 59 AN3 ADC CH3 INPUT
0 .. 3.0 V voltage range
Input BTN63 56 57 BTN1 Input
Input BTN62 54 55 BTN2 Input
Input BTN61 52 53 BTN3 Input
Input BTN60 50 51 BTN4 Input
Input BTN89 48 49 BTN5 Input
Input BTN58 46 47 BTN6 Input
Input BTN57 44 45 BTN7 Input
Input BTN56 42 43 BTN8 Input
Input BTN55 40 41 BTN9 Input
Input BTN54 38 39 BTN10 Input
Input BTN53 36 37 BTN11 Input
Input BTN52 34 35 BTN12 Input
Input BTN51 32 33 BTN13 Input
Input BTN50 30 31 BTN14 Input
Input BTN49 28 29 BTN15 Input
GND GND 26 27 BTN16 Input
Input BTN80 24 25 GND GND
Input BTN78 22 23 BTN79 Input
Input BTN76 20 21 BTN77 Input
Input BTN74 18 19 BTN75 Input
Input BTN72 16 17 BTN73 Input
Input BTN70 14 15 BTN71 Input
Input BTN68 12 13 BTN69 Input
Input BTN66 10 11 BTN67 Input
Input BTN17 8 9 BTN65 Input
Input BTN19 6 7 BTN18 Input
Input BTN32 4 5 LED1 3.0 V status LED OUTPUT
through 220 Ohm series resistor
Input BTN30 2 3 BTN20 Input
- - - 1 BTN31 Input

Right M.2 connector

Bottom side Top side
Function Signal Pin Signal Function
Input BTN28 66 67 BTN29 Input
Input BTN26 64 65 BTN27 Input
Input BTN22 62 63 BTN25 Input
Input BTN24 60 61 BTN21 Input
Do not connect - 58 59 BTN23 Input
Do not connect - 56 57 - Do not connect
Input BTN96 54 55 - Do not connect
Input BTN95 52 53 - Do not connect
Input BTN94 50 51 - Do not connect
Input BTN93 48 49 - Do not connect
Input BTN92 46 47 SLEEP BP2 module sleep status
Active LOW (BP2 sleeps)
Input BTN91 44 45 TX LEUART TX signal OUTPUT
Input BTN90 42 43 RX LEUART RX signal INPUT
Input BTN89 40 41 LED2 2nd indicator LED OUTPUT
3.0 V through 220 Ohm resistor
Input BTN88 38 39 PADDLE1 Paddle input 1
Input BTN87 36 37 PADDLE2 Paddle input 2
Input BTN86 34 35 GND GND
Input BTN85 32 33 VDD +3.0 V OUTPUT
Max. 100 mA including AVCC current.
Input BTN84 30 31 BTN33 Input
Input BTN83 28 29 BTN34 Input
Input BTN82 26 27 BTN35 Input
Input BTN81 24 25 BTN36 Input
GND GND 22 23 BTN37 Input
GND GND 20 21 BTN38 Input
LED indicator for battery charging
Connect LED Anode to BATT 		LED_CHG 18 19 BTN39 Input
SWITCH_IN operating voltage input BATT 16 17 BTN40 Input
BATT 14 15 BTN41 Input
LiPO/Ion/battery positive terminal BATT+ 12 13 BTN42 Input
BATT+ 10 11 BTN43 Input
GND GND 8 9 BTN44 Input
GND 6 7 BTN45 Input
Voltage INPUT terminal
5.0 V ± 5 % 		VIN 4 5 BTN46 Input
VIN 2 3 BTN47 Input
- - - 1 BTN48 Input
Retrieved from "https://granitedevices.com/w/index.php?title=Simucube_Wireless_Wheel_2&oldid=7525"