Difference between revisions of "Simucube 2 True Drive releases"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(→‎Simucube 2 True Drive files)
(→‎Simucube 2 True Drive files)
 
(215 intermediate revisions by 2 users not shown)
Line 8: Line 8:
 
Please note that this version history table only lists collected changes after each publicly released version.  
 
Please note that this version history table only lists collected changes after each publicly released version.  
 
{| class="wikitable"
 
{| class="wikitable"
 +
! Date
 +
! True Drive Release
 +
! Download link
 +
! Description
 +
|-
 +
|-
 +
| July 5th, 2024
 +
| 2024.7.1 hotfix
 +
| [[Media:Simucube_2_True_Drive_2024.7.1.zip|Simucube 2 True Drive]]
 +
|
 +
'''Changes and fixes - 2024.7.1 hotfix'''
 +
* Reconstruction Filter can be turned off again.
 +
* Prevent possible 485001 fault on servo drive on device startup. This is harmless out of range parameter write attempt if default profile stored on device contained 2024.5 recon filter v2 beta testing value. In such case the Reconstruction Filter V2 value is set to 4.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| July 2nd, 2024
 +
| 2024.7
 +
| [[Media:Simucube_2_True_Drive_2024.7.zip|Simucube 2 True Drive]]
 +
|
 +
 +
'''Changes and fixes'''
 +
* Official release of Reconstruction Filter V2. It replaces the original Reconstruction Filter. Profile parameter is adjusted automatically when loading a profile with V1 data, but no exact match is achieved.
 +
* Debug log always logs some particular events that were not logged before.
 +
* Add wireless wheel module version to debug log.
 +
* Simplify logic on how Nm based value is shown in the UI for maximum torque, and remove unneeded current value.
 +
* Fix a crash when adding a new offline profile as the last one in the list.
 +
* Improve FFB effect status indicator when 360 Hz mode is used by iRacing.
 +
* Fix error where no faults were shown in the user interface in some fault situations on device. Issue was introduced in 2024.1 release.
 +
 +
'''Known issues'''
 +
* Torque level will always show 40% / 10 Nm when opening edit FFB dialog. This issue was fixed in a silent fix, download and install 2024.7 again.
 +
* Reconstruction filter cannot be turned off completely - selecting "off" will actually use a very smooth setting.
 +
Please send us feedback via the new feedback button!
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| May 29th, 2024
 +
| 2024.5 + Reconstruction Filter V2 testing
 +
| [[Media:Simucube 2 True Drive 2024.5+reconv2.zip|Simucube 2 True Drive]]
 +
|
 +
 +
'''Changes and fixes'''
 +
* Experimental testing of Reconstruction Filter V2. Test instructions and feedback instructions on our [https://community.granitedevices.com/t/reconstruction-filter-v2-testing/11612 Community Forum] or in Simucube Discord.
 +
 +
Please send us feedback via the new feedback button!
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| May 9th, 2024
 +
| 2024.5
 +
| [[Media:Simucube_2_True_Drive_2024.5.zip|Simucube 2 True Drive]]
 +
|
 +
 +
'''Changes and fixes'''
 +
* Improved indicators of different FFB modes by adding them to the Status tab.
 +
* Fix some mis-programmed units to correctly identify themselves as Pro.
 +
* Automatically restart the 360 Hz mode FFB generation if game is sending data for it.
 +
* Improve reliability of the offline profile list to not have it accidentally delete existing files. Renaming a profile by just changing its letter case will not be possible anymore (software prevents it now), but workaround is to rename twice via a temporary new name.
 +
 +
Please send us feedback via the new feedback button!
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| March 12th, 2024
 +
| 2024.3
 +
| [[Media:Simucube_2_True_Drive_2024.3.zip|Simucube 2 True Drive]]
 +
|
 +
 +
''Note''
 +
 +
 +
Some people are reporting that Windows Defender flags the downloaded file as a virus. We are investigating, there seems to be a number of reports of Defender having false detections on exactly this recently. Virustotal.com does not find any viruses on the file.
 +
 +
 +
'''Changes and fixes'''
 +
* Additional styling for True Drive for some UI elements that still followed Windows color, resulting in sub-optimal colors.
 +
* Install script does not clear out Automatic High Torque Mode and other registry-based settings anymore.
 +
* Fix a potential but rare issue where it was impossible to turn the torque clipping notification off.
 +
* Fix a bug where renaming offline profile by just changing letter case resulted in a deletion of that offline profile file.
 +
 +
 +
'''New feature'''
 +
* Support for high data rate mode for games to send FFB signal in batches. The last tab in True Drive will indicate HighDataRateFFB when the mode is active.
 +
* This FFB mode will be enabled in iRacing patch, release date TBD.
 +
* Recommendation to tune the Reconstruction Filter to 1 or even to OFF to get full benefit of higher FFB detail.
 +
 +
 +
Please send us feedback via the new feedback button!
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| January 31st, 2024
 +
| 2024.1
 +
| [[Media:Simucube_2_True_Drive_2024.1.zip|Simucube 2 True Drive]]
 +
|
 +
'''Note'''
 +
Automatic high torque mode has to be set up again after updating to this release.
 +
 +
 +
'''Changes and fixes'''
 +
* New UI style for True Drive
 +
** Some minor UI elements still have old style, those will get fixes later
 +
* Offline profile management improvements
 +
** Offline profile selection will track the last action made in the menu
 +
** Offline profiles are alphabetically sorted
 +
* Simucube Wireless Wheels are not anymore disconnected at all if a game is running and has created FFB effects
 +
** Previous behavior was that wheel wasn't supposed to disconnect if game actively sent new data, i.e. driver was on track
 +
* The Torque Clipping audible notification works again
 +
* Add some decimal points to analog axis status data on the first tab
 +
 +
 +
'''FFB development testing as beta feature'''
 +
* New Experimental FFB filters menu
 +
** Feature enables trying out new things without having them saved into actual profiles
 +
** Access the feature from the first tab
 +
** Features will have to be re-applied to device after any profile change/update
 +
 +
 +
'''FFB changes'''
 +
* New experimental/beta FFB setting: Angle-based torque reduction
 +
** Reduces FFB if wheel has turned for over 110 degrees, helps driver to resume full control of the car after a spin
 +
** Access setting via the the experimental menu
 +
** Send feedback via the feedback button
 +
* Motor tuning
 +
** Motor tuning has returned to that of the 2023.10 release. We will continue the work that was released in 2023.12 testing release in Discord.
 +
 +
 +
'''Bug fixes'''
 +
* Simucube Wireless Wheels are not disconnected due to one hour time-out if any button is being used on the wheel, regardless if games are running or not.
 +
 +
 +
Please send us feedback via the new feedback button!
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| November 6th, 2023
 +
| 2023.10.1
 +
| [[Media:Simucube_2_True_Drive_2023.10.1.zip|Simucube 2 True Drive]]
 +
|
 +
'''Hotfix release'''
 +
 +
Please send us feedback via the new feedback button!
 +
 +
'''Changes and fixes'''
 +
* Analog axis data from wireless wheel or from Accessory Port is now shown correctly in the Overview tab
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| October 27th, 2023
 +
| 2023.10
 +
| [[Media:Simucube_2_True_Drive_2023.10.zip|Simucube 2 True Drive]]
 +
|
 +
This release is a start of a series of updates to Simucube 2. Follow our progress at [https://simucube.com/sc2updates at our landing page and Trello].
 +
 +
Please send us feedback via the new feedback button!
 +
 +
'''Changes and fixes'''
 +
* Add new FFB setting: Centering Spring. This new effect that also works in-game, can be used to add self-aligning torque to the FFB, and it makes some old games that only had vibration effects more intuitive to drive.
 +
* Internal firmware FFB scaling change. Maximum Strength setting should not affect bumpstops anymore. This change should not change FFB feel.
 +
* Add some new Ascher Racing wheel images.
 +
* Remove unused code and some UI options that were not used.
 +
* Add feedback button that focuses on the new features.
 +
* Remove "Report Issue" feature from the feedback dialog.
 +
* Various small UI adjustments including making space on the Overview tab for some new features.
 +
 +
 +
'''Known issue'''
 +
- Analog axis data from wireless wheel or from Accessory Port are not shown correctly in the Overview tab.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| February 15th, 2023
 +
| 2023.2
 +
| [[Media:Simucube_2_True_Drive_2023.2.zip|Simucube 2 True Drive]]
 +
|
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
 +
'''Changes and fixes'''
 +
* Further reduce audible knocks in the DirectInput Damping effect.
 +
* Fix stability of DirectInput Damping effect in some games.
 +
* Remove game-generated torque when bumbstop is deemed to cause unsafe torque jolt. This could happen when user changes FFB parameters from True Drive while the wheel is turned to be near the bumpstop, and a game is running. This fixes possibility of a runaway wheel in these situations.
 +
* Added function to duplicate an offline profile.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| January 13th, 2023
 +
| 2023.1
 +
| [[Media:Simucube_2_True_Drive_2023.1.zip|Simucube 2 True Drive]]
 +
|
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
 +
'''Changes and fixes'''
 +
* Reduce audible knocks in the DirectInput Damping effect. The issue was introduced in 2022.11 release.
 +
* Resetting FFB parameters in Simucube Tuning Button mode works for all parameters without 485001 fault.
 +
* Fix an issue where some Simucube Wireless Wheel 2 based wheels (e.g. Ascher Racing F64-SC V3) had a button configuration that was not working as expected.
 +
* Eliminate a rare application crash in True Drive.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| December 10th, 2022
 +
| 2022.11
 +
| [[Media:Simucube_2_True_Drive_2022.11.zip|Simucube 2 True Drive]]
 +
|
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
 +
 +
'''Changes and fixes - General'''
 +
* Add more debug events of wireless wheels
 +
* Fixed issue with Simucube Button mode when resetting settings back to as they were.
 +
* Fix the wheel rotated over endstop LED notification to work correctly.
 +
* ESC button does not hide the offline profiles list anymore.
 +
* Mapping wireless wheel buttons to same buttons as a shifter on the Accessory Port works again.
 +
* Wireless wheel automatic idle disconnect does not happen if any wireless wheel button has been pressed during last hour.
 +
 +
'''Changes and fixes - USB and FFB'''
 +
* USB descriptor was tuned to make device compatible with Linux.
 +
** There will be no official Linux builds or support.
 +
** We aim to add a wiki page to explain how to work with Linux.
 +
* Descriptor changes caused changes in FFB effects that are used by mainly older games:
 +
** Re-tuned DirectInput Friction and Damping effects to utilize all parameters.
 +
*** True Drive profiles will have 100% DirectInput Friction and Damping by default. It will be a good starting point for all games.
 +
*** Older versions of True Drive could go unstable with 100% settings on these. Therefore older versions will load safe defaults for these effects if a profile made with this or later release is loaded.
 +
** Re-tuned DirectInput Spring effect to utilize all parameters.
 +
** Re-tuned DirectInput Sine Wave to work correctly in some situations where it did not work correctly.
 +
** Re-tuned DirectInput Triangle Wave, Square Wave, and Sawtooth effects to work correctly.
 +
* FFB Device Gain set by the game does not affect bumpstops anymore.
 +
* Individual gain parameter of the effects are now respected as per USB Physical Device standards.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| July 4th, 2022
 +
| 2022.7
 +
| [[Media:Simucube_2_True_Drive_2022.7.zip|Simucube 2 True Drive]]
 +
|
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
 +
 +
'''Changes and fixes - Wireless Wheels'''
 +
* Added event log details about reason (connection loss, idle timeout, manual disconnection) why wireless wheel was disconnected.
 +
 +
'''Changes and fixes - True Drive'''
 +
* Using Simple Mode profiles populate all FFB parameters correctly to device. Bug was introduced some time after Paddock release.
 +
* Renaming offline profile to same name as before and clicking OK does not delete the profile anymore.
 +
* It is not possible to set empty or only white space password for profile editing.
 +
* Changing profile settings does not cause the save settings to Simucube -button to blink on hardware settings tab anymore.
 +
* Installer will detect and ask to close running True Drive before attempting to update.
 +
* Device ID content contains device temperature and other things for debug purposes.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| May 2nd, 2022
 +
| 2022.5
 +
| [[Media:Simucube_2_True_Drive_2022.5.zip|Simucube 2 True Drive]]
 +
|
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
 +
 +
'''Changes and fixes - Wireless Wheels'''
 +
* Definitive fix for greyed out Wireless Wheels tab with "Wireless Wheel Receiver not detected" issue
 +
 +
'''Other improvements and changes'''
 +
* Remove unneeded anonymous opt-in device performance telemetry data collection
 +
* Add useful anonymous opt-in device performance telemetry data collection (fault codes etc.)
 +
* Increase reliability of Hiperface encoder initialization on device start. This may affect some Simucube 2 Ultimate units only.
 +
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| February 22nd, 2022
 +
| 2022.2
 +
| [[Media:Simucube_2_True_Drive_2022.2.zip|Simucube 2 True Drive]]
 +
|
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
 +
 +
'''Changes and fixes - Wireless Wheels'''
 +
* More fix attempts at solving the Simucube Wireless Wheel Receiver not starting up in releases 2021.11 or 2021.12.
 +
** Note: Restart of the Simucube 2 might be required after servo drive firmware update to get Wireless Wheel receiver working.
 +
** Issue still does not seem to be solved for every Simucube 2 device.
 +
 +
 +
'''Other improvements'''
 +
* Reduce/eliminate the chance of audibly buzzing motor in Safe Torque mode.
 +
* Improve torque control performance
 +
** Improve precision/smoothness of sinusoidal current waveforms.
 +
** Eliminate audible noise glitches that appeared in certain situations.
 +
** Eliminate the chance of torque glitch at transition between High Torque to Safe Torque modes.
 +
* Eliminate potential chance of fault with 485001 error on first usage(s) of the product.
 +
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/17/release/vc_redist.x64.exe from Microsoft's server] if you get msvc dll errors when you try to start True Drive.
 +
|-
 +
| December 16th, 2021
 +
| 2021.12
 +
| [[Media:Simucube_2_True_Drive_2021.12_Setup.zip|Simucube 2 True Drive]]
 +
|
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
 +
'''Changes and fixes'''
 +
 +
Following bugs were introduced in 2021.11 release and are fixed:
 +
* Fix FFB effects not starting correctly if device is started when game (like iRacing) is running.
 +
* Fix rare fault where the wireless wheel receiver module is not detected on device start.
 +
* Fix device not going to firmware update mode if E-stop button is pressed.
 +
 +
Other changes:
 +
* Move & regroup some buttons in True Drive.
 +
* Add back the missing active DirectInput effect indicators in the Edit FFB dialog.
 +
* Properly pop up firmware update/downgrade dialog in downgrade situations.
 +
* Show correct Offline or Paddock profile name (instead of Safe Profile) active after setting default profile and restarting device.
 +
* Add UI for starting in window/with tray icon/minimized to tray, and fix starting minimized to tray to work.
 +
* Add UI for starting / not starting True Drive on Windows user login.
 +
* Default wheel image is loaded from Documents/Simucube 2/wheels/wheelimage.png which persists over software updates.
 +
* Add automatic update checking and new version availability indicator.
 +
 +
'''Device identity fixes'''
 +
* Small number of Simucube 2 Sport units that incorrectly identify themselves as Pro are fixed as Sport
 +
* Small number of Simucube 2 Pro units that incorrectly identify themselves as Sport are fixed as Pro
 +
** Note: Identity changes after saving settings to device memory at least once, and then rebooting the device
 +
** Re-assigning controls in games will be required for the small number of affected units.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/16/release/vc_redist.x64.exe from Microsoft's server] if you get msv dll errors when you try to start True Drive.
 +
|-
 +
| November 27th, 2021
 +
| 2021.11 + hotfix
 +
| [[Media:Simucube_2_True_Drive_2021.11-hotfix_Setup.zip|Simucube 2 True Drive]]
 +
|
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
'''Known issues in 2021.11 releases'''
 +
* FFB effects not starting correctly if device is started when game (like iRacing) is running. Workaround: iRacing Options -> FFB off -> Done -> Options -> FFB on -> Done.
 +
* Simucube Wireless Wheel receiver module is sometimes not detected device startup. Workaround: Power off and power on again.
 +
 +
'''Hotfix changes and fixes'''
 +
* Missing fix from last release: True Drive Paddock will respect the user's setting of redirecting to My Profiles in Paddock. Setting for this is available in Paddock (Click your user -> edit profile), and default is to direct to My Profiles.
 +
* Wireless wheel images are first searched from Documents/Simucube 2/wheels, then install directory/wheels, and if not found, then the default image is shown
 +
* Wireless wheel image does not unload when user closes the custom image mapping dialog without having done any changes.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/16/release/vc_redist.x64.exe from Microsoft's server] if you get msv dll errors when you try to start True Drive.
 +
|-
 +
|-
 +
| November 26th, 2021
 +
| 2021.11
 +
| (file removed, use later one)
 +
|
 +
'''Simucube firmware major rewrite'''
 +
* Supports only Paddock/Offline profiles
 +
 +
* '''Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.'''
 +
 +
* Compatibility to downgrade has been maintained, however Classic profiles are lost
 +
* Supports Simucucube Tuning Button functionality on Simucube Tahko GT-21 wheel
 +
* Supports Simucube Wireless Wheel 2 based wheels
 +
* This software release does not send any anonymous telemetry regardless of user's consent.
 +
 +
'''Installer'''
 +
* Software is installed via exe file
 +
* User's setting files and cached/offline profiles are stored into Documents/Simucube 2/cachedprofiles directory
 +
* Custom wheel images are to be stored in to Documents/Simucube 2/wheels directory. Remappping wheels might be required if custom mapping is used.
 +
* Firmware update/downgrade to the installed True Drive version is automated without the need to use command line parameters
 +
 +
'''Changes and fixes'''
 +
* Some reliability improvements in communicating with the servo drive at device startup
 +
* Fixed timing issue on True Drive startup which may have caused a mismatch between the profile on device < - > profile indicated by True Drive Paddock
 +
* Added a workaround for Raceroom Racing Experience bug (wheel spins on game exit).
 +
* Hide unneeded context menus in True Drive Paddock
 +
* Bugfix: True Drive Paddock will respect the user's setting of redirecting to My Profiles in Paddock. Setting for this is available in Paddock (Click your user -> edit profile), and default is to direct to My Profiles.
 +
* Wireless wheel tab does not accidentally close when pressing ESC button
 +
* Fix trayminimized command line parameter not working as intended
 +
* Remove nonworking "reload from Simucube" and "Start from Scratch" buttons from the last tab in True Drive. They are not needed with Paddock.
 +
* Bugfix: Make it possible to only enable High Torque Mode manually once the device has reached the Operational state.
 +
 +
'''Offline mode improvements'''
 +
* Added "save as default" button.
 +
* Added renaming of offline or cached Paddock profile.
 +
* Added confirmation for deletion of offline profile.
 +
* Readjusted UI to show more profiles at once.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/16/release/vc_redist.x64.exe from Microsoft's server] if you get msv dll errors when you try to start True Drive.
 +
|-
 +
| September 18th, 2021
 +
| 2021.9 + True Drive Paddock
 +
| [[Media:Simucube_2_True_Drive_2021.9_with_True_Drive_Paddock.zip|Simucube 2 True Drive]]
 +
|'''Includes Simucube 2 True Drive Paddock release'''
 +
'''Changes and fixes - general'''
 +
* Added menu for importing settings from a classic profile when editing settings for Paddock profile.
 +
* Small additions to offline mode functionality.
 +
* In Paddock, added support for quickly trying out profiles without adding them to user's list of profiles.
 +
* Disabled saving&restoring of window position in the Paddock application to help a white screen on start -issues for some users. Saving the window position shall return in the future.
 +
* Set the True Drive Paddock to use software OpenGL rendering to fix issues with screen flicker and also to potentially solve the white screen issue.
 +
 +
'''Changes and fixes - servo drive'''
 +
* Re-instated some audible noise mitigations that were removed in 2021.8 release.
 +
* Added audible notifications for some future Simucube Wireless Wheel functions.
 +
 +
'''Changes and fixes - hardware support'''
 +
* Release supports Simucube 2 units manufactured after week 36/2021. Hardware change is a minor change to support alternative components to battle the [https://en.wikipedia.org/wiki/2020–2021_global_chip_shortage global chip shortage].
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/16/release/vc_redist.x64.exe from Microsoft's server] if you get msv dll errors when you try to start True Drive.
 +
 +
'''Note:''' Package was updated on September 18th to fix a software not starting -issue when trayminimized -parameter was used.
 +
|-
 +
|August 18th, 2021
 +
|2021.8 + True Drive Paddock
 +
| [[Media:Simucube_2_True_Drive_2021.8_with_True_Drive_Paddock.zip|Simucube 2 True Drive]]
 +
|'''Includes Simucube 2 True Drive Paddock release'''
 +
'''Changes and fixes - general'''
 +
* Access to True Drive Paddock has been enabled for all Simucube 2 racers!
 +
* Small tidy-ups and fixes in the True Drive User Interfaces
 +
* Added a friendly deprecation reminder for the True Drive Classic mode. Classic mode will be removed in an upcoming release.
 +
* Added Troubleshooting.txt for some common issues regarding True Drive not starting.
 +
* Fix device not starting or FFB dropout when driving -issues that occurred on a few Simucube 2 units in all firmwares since 2021.1 release and up
 +
* Change current measurements to as they were in 2020.10 release. Device may be slightly more noisy compared to other 2021.x releases. Improvements shall return in the next release.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/16/release/vc_redist.x64.exe from Microsoft's server] if you get msv dll errors when you try to start True Drive.
 +
|-
 +
|July 9th, 2021
 +
|2021.7 + True Drive Paddock Early Access 
 +
| [[Media:Simucube_2_True_Drive_2021.7_with_Paddock_Early_Access.zip|Simucube 2 True Drive]]
 +
|'''Includes Simucube 2 True Drive Paddock Early Access release'''
 +
'''Changes and fixes - general'''
 +
* Telemetry consent change is being shown correctly in the True Drive.
 +
* Fixed an issue where the True Drive Classic moved the profile settings scroll area, making it very difficult to change steering angle in Expert mode.
 +
 +
'''Changes and fixes - True Drive Paddock'''
 +
* Rearranged indicator and button for High Torque Mode in True Drive Paddock.
 +
* Fix some random crashes
 +
* New feature: Set default profile to device. Device will start with Paddock profile settings if a default profile has been set from True Drive Paddock.
 +
* New feature: Offline mode. True Drive caches profiles that have been applied to device, and they can be used in offline mode.
 +
* Steering angle indicator will correctly track the real steering angle when a True Drive Paddock profile has been applied but Paddock has not yet sent any new profile to the device.
 +
* Button to conveniently access FFB settings has been added to My Profiles view.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/16/release/vc_redist.x64.exe from Microsoft's server] if you get msv dll errors when you try to start True Drive.
 +
|-
 +
|May 25th, 2021
 +
|2021.5 + True Drive Paddock Early Access 
 +
| [[Media:Simucube_2_True_Drive_2021.5_with_Paddock_Early_Access.zip|Simucube 2 True Drive]]
 +
|'''Includes Simucube 2 True Drive Paddock Early Access release'''
 +
'''Changes and fixes - general'''
 +
* Adjusted servo drive tuning to fix rare device reboot issues for some units happening since 2021.1 release.
 +
* Switched to 64bit compiler for True Drive. Note that you might need to download 64bit version of the Microsoft Visual Studio 2019 redistributable package (link below).
 +
 +
'''Changes and fixes - True Drive Paddock'''
 +
* Fix crash when clicking save -button on the hardware tab in Paddock mode.
 +
* Fix some random crashes
 +
* Fix Paddock mode application always crashing on exit.
 +
* Change the steering angle in Paddock mode to track with assumed 900 degree steering angle if the online application has not yet sent any active profile to the device. Also the buttons and analog axises keep tracking in Paddock mode.
 +
* Fix application crash when exiting via tray icon.
 +
* Fix the tray icon options to work with also the paddock application.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package '''(64bit version)''' [https://aka.ms/vs/16/release/vc_redist.x64.exe from Microsoft's server] if you get msv dll errors when you try to start True Drive.
 +
|-
 +
|May 12th, 2021
 +
|2021.4_4 + True Drive Paddock Early Access
 +
| [[Media:Simucube_2_True_Drive_2021.4_4_with_Paddock_Early_Access.zip|Simucube 2 True Drive]]
 +
|'''Simucube 2 True Drive Paddock Early Access release'''
 +
* Release is the same as 2021.4_4 but with Simucube 2 True Drive Paddock Early Access.
 +
* See [https://simucu.be/truedrive our FAQ] for details.
 +
* Community forum thread [https://community.granitedevices.com/t/simucube-2-true-drive-paddock-early-access/7866 is here.]
 +
* You can also leave feedback by clicking the Feedback button directly in True Drive.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package [https://aka.ms/vs/16/release/vc_redist.x86.exe from Microsoft's server] if you get msv dll errors when you try to start True Drive.
 +
|-
 +
|April 29th, 2021
 +
|2021.4_4
 +
| [[Media:Simucube 2 True Drive 2021.4_4.zip|Simucube_2_True_Drive_2021.4_4.zip]]
 +
|'''Hotfix'''
 +
'''Changes and fixes'''
 +
* Fix potential crash in True Drive when it loads.
 +
 +
Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package [https://aka.ms/vs/16/release/vc_redist.x86.exe from Microsoft] if you get msv_something.dll errors when you try to start True Drive.
 +
|-
 +
|April 18th, 2021
 +
|2021.4_3
 +
| (download removed, get later release)
 +
|'''Hotfix for 2021.4 release'''
 +
'''Changes and fixes'''
 +
* Fixed servo drive not updating -issue that happened on some devices in original 2021.4 release.
 +
* New feature: True Drive remembers its window position and size. Fixed to work in _3 release.
 +
 +
(still temporarily hosted on a 3rd-party service.)
 +
|-
 +
|April 16th, 2021
 +
|2021.4
 +
| (download removed, get later release)
 +
|'''Recommended update for all Simucube Wireless Wheel users'''
 +
'''Changes and fixes'''
 +
* Simucube Wireless Wheels: Fixed an issue that could cause wireless wheels buttons to stop registering in games in some very rare situations.
 +
* Servo drive tuning: Reverted some changes in 2021.1 release that increased the audible noise in some situations.
 +
* USB changes: Reverted USB interface changes in 2021.1 release that caused device disconnects and device not recognized -issue after PC reboot.
 +
* Added protections to firmware to prevent corrupt settings when more than allowed number of profiles are stored into "classic" profiles. More than 99 user-made classic profiles cannot be used anymore (they never worked properly anyway).
 +
* Simucube hardware revision is shown correctly in the UI.
 +
 +
'''Build system update'''
 +
* This and all later releases are built with Microsoft Visual C++ compiler. Fresh Windows installs need to have the runtime libraries installed. If you get DLL errors, please run the vcdredist_x86.exe installer.
 +
 +
'''Release supports Early Access of Simucube Profile Online'''
 +
* Profile Online Early Access is enabled for Simucube 2 R1 Sport/Pro drivers, and all Simucube 2 Ultimate drivers.
 +
* Profile Online Early Access will be released soon as a separate download.
 +
 +
'''How to use Profile Online and Classic modes'''
 +
* The _Online Early Access.exe file launches the online version, and if online mode is active, the online mode sends the active profile to the device.
 +
* If _Classic.exe is launched, Online mode is deactivated and classic-mode profiles can be used as backup. Note, that classic mode as-is will be removed in future version.
 +
* Migrating to Online profiles: Export each of normal profiles to separate .ini files and import them when creating new profiles in Online mode.
 +
* Save settings -button (for permanent settings saving) in Online Mode has been moved to the Hardware settings tab.
 +
 +
'''Note:''' Download is temporarily hosted on a 3rd-party site due to an unforeseen configuration issue.
 +
|-
 +
|January 31st, 2021
 +
|2021.1
 +
| [[Media:Simucube 2 True Drive 2021.1 repackage.zip|Simucube_2_True_Drive_2021.1_repackage.zip]]
 +
|'''NOTE'''
 +
* We are investigating a USB fault in this release version. Symptons are that device will require a restart after PC restart. Very rare sympton could also be that the device suddenly gets non-recognized even when just idling in Windows.
 +
 +
'''Bumpstop behavior fix'''
 +
* Changed bumpstops to avoid issue where the bumpstop force could be overcome by game-generated FFB in some cases.
 +
 +
'''Torque tuning changes and audible changes'''
 +
* Fix constant audible tone issue in some Simucube 2 Sport and Pro R2 units
 +
* Change the long beep of going to standby mode to more informative tone.
 +
* Adjust controller tuning to reduce other audible noises from the motor.
 +
** This will be tuned further based on feedback from this 2021.1 release.
 +
|-
 +
|October 2nd, 2020
 +
|2020.10
 +
| [[Media:Simucube_2_True_Drive_2020.10.zip|Simucube_2_True_Drive_2020.10.zip]]
 +
|Release contains Wireless Wheel and bumpstop changes.
 +
'''Forget all wireless wheels'''
 +
* Added function to forget all previously paired wireless wheels and tidied up the UI for this.
 +
 +
'''Bumbstops'''
 +
* Bumpstops begin at exactly the same angle that is indicated in the user interface. (old behavior was to be at 100% torque at that point, so bumpstop began earlier.)
 +
* Bumpstops are not affected by the constantly operating filters on the servo drive.
 +
 +
'''Other changes'''
 +
* Added a possible fix for some "stuck at waiting for the drive to get ready" -issues.
 +
* Added support for Simucube 2 Sport and Simucube 2 Pro manufactured after week 38/2020.
 +
 +
|-
 +
|July 31st, 2020
 +
|2020.7
 +
| [[Media:Simucube_2_True_Drive_2020.7.zip|Simucube_2_True_Drive_2020.7.zip]]
 +
|Release contains many fixes and changes.
 +
''' Important fix for Simucube Wireless Wheels '''
 +
* Fixes too high battery consumption on some Simucube Wireless Wheels. Bug was introduced in release 2020.4.
 +
''' Wireless wheel scan changes'''
 +
* Wireless wheel scanning is not required to be started/stopped. The confusing buttons in True Drive been replaced with ''clear list and restart scan'' -button.
 +
 +
'''Bumbstops'''
 +
* Bumpstop rework, including safety and ease-of-use changes
 +
* Bumpstop effect has been simplified. All bumbstop settings have 100% power, and there are three well-tuned settings (soft/medium/hard) available.
 +
* Bumbstop setting is now a per-profile setting.
 +
 +
'''Other changes'''
 +
* Internal device telemetry data sync event does not cause wheel torque to be at zero anymore. This mainly affected non-FFB game titles.
 +
** Only slight torque roughness can be felt during the data syncronization event, which should be much better than it was before.
 +
* Desktop centering spring has been significantly strengthened to make it more usable.
 +
* There is a button in the advanced tab that can be used to copy all device identification data (software versions and serial numbers) to clipboard.
 +
* Further fine tuning for high-DPI displays, with command line options ''small'' and ''large'' to give some options.
 +
* Profile export functionality: Drop-down menu selection for exporting all the profiles, or just the current profile.
 +
* Device status updates are not frozen anymore after unsuccesfully importing profiles (bad file or not a profile file). Credits to Nir Nave for finding the issue.
 +
* Internal fixes, tidyups and changes in the device firmware.
 +
 +
|-
 +
|April 24th, 2020
 +
|2020.4
 +
| [[Media:Simucube_2_True_Drive_2020.4.zip|Simucube_2_True_Drive_2020.4.zip]]
 +
|
 +
'''Grainy feel fix'''
 +
* Some tuning parameters were changed in the servo drive to get back to 2020.1 behavior.
 +
 +
'''Small changes and fixes'''
 +
* Disconnection of a wireless wheel will not cause torque to be disabled, unless the wheel had a torque off switch configured.
 +
* After unlocking locked profile settings, they can be relocked again.
 +
* Audible beeps enabled/disabled checkbox also affects wireless wheel status beeps.
 +
* Physical sequental shifter connected to the D15 Accessory Port will map to same pins as the Simucube Wireless Wheel shifter paddles. This can be configured per-profile.
 +
* There is a command line option 'trayminimized' to launch True Drive to Tray Icon in minimized state (window is not shown).
 +
* Remove Simucube 1 overvoltage fault detection that was sometimes triggered when it was not actually the fault cause.
 +
* Added detection of possibly low wireless wheel battery in some situations where battery voltage remains high but the battery voltage would drop under load.
 +
 +
'''Upcoming in the next releases'''
 +
* We decided to release 2020.4 due to some important fixes, and these features were not completed in time:
 +
* Bumpstop rework, including safety and ease-of-use changes
 +
** Bumpstop effect has been simplified. All bumbstop settings have 100% power, and there are three well-tuned settings (soft/medium/hard) available.
 +
** Bumbstop setting is now a per-profile setting.
 +
* Internal device telemetry data sync event does not cause wheel torque to be at zero anymore. This mainly affected non-FFB game titles.
 +
 +
|-
 +
|March 29th, 2020
 +
|2020.3
 +
| [[Media:Simucube_2_True_Drive_2020.3.zip|Simucube_2_True_Drive_2020.3.zip]]
 +
|'''Small changes and fixes'''
 +
* Automatic Simucube Wireless Wheel idle disconnect - wheels will disconnect after 1h of inactivity to optimize battery life. Activity is monitored through wheel turning 10 degrees or more. Also the disconnect is not allowed to happen if there are FFB effects in use.
 +
* Built with Qt 5.14.1 - True Drive should scale better on high-DPI displays
 +
* Drivers can set password protection for profile settings. This feature is especially useful for commercial sim operators - if a password is set, visitors can't make unwanted adjustments.
 +
* Brief display of wrongly showing 2.56 V for wireless wheel voltage when connecting a wireless wheel is fixed.
 +
* Sometimes impossible to click Re-enable Torque button is now always possible.
 +
 +
'''Automatic High Torque Mode'''
 +
* Drivers can set the High Torque Mode to be enabled automatically on device start.
 +
* If automatic High Torque Mode has been enabled, the standby mode functionality including the beeps are disabled as well.
 +
* For these to work, True Drive must be running on the computer.
 +
* There is a command line option 'tray' to launch True Drive to Tray Icon.
 +
|-
 +
|February 14th, 2020
 +
|2020.1
 +
| [[Media:Simucube_2_True_Drive_2020.1.zip|Simucube_2_True_Drive_2020.1.zip]]
 +
|Note: We are changing to simpler year+version format with this release.
 +
'''Changes and fixes'''
 +
* It is possible to save No as the answer to device telemetry consent.
 +
* Add an option to allow mouse wheel scroll to change profile settings.
 +
* Reduce True Drive CPU consumption when window is activated.
 +
* Additional color indicator if wireless wheel battery is low.
 +
* Reduced volume of audible notification beeps.
 +
 +
'''Wheel centering fixes and changes'''
 +
* Fix wheel centering changing 360 degrees sometimes.
 +
* It is possible to quickly reset steering center for just temporarily again.
 +
* Factory-calibrated center point will be invalid after this update, users must set a new wheel centerpoint upon first use.
 +
'''Simucube Wireless wheel image management'''
 +
* By default, wheels/wheelimage.png is loaded.
 +
* If a wireless wheel is connected, a short-named wireless wheel png is loaded from /wheels directory.
 +
* Some default wireless wheel images are supplied with the software.
 +
** User interface tooltip will say which file is being tried to load.
 +
* Right-clicking the wheel image in True Drive, the Driver is able to map/unmap wheel images to individual wireless wheels.
 +
 +
As previously, the wheel images must be 400x400px transparent PNG files.
 
|-
 
|-
 
!Date
 
!Date
Line 14: Line 641:
 
! Description
 
! Description
 
|-
 
|-
−
|November, 2019
 
−
|1.0.14
 
−
| upcoming version
 
−
|'''Changes and fixes'''
 
−
* It is possible to save No as the answer to device telemetry.
 
−
* Add an option to allow mouse wheel scroll to change profile settings.
 
−
|-
 
−
 
 
|November 15th, 2019
 
|November 15th, 2019
 
|1.0.13
 
|1.0.13
Line 126: Line 745:
 
|-}
 
|-}
  
 +
[[Category:Downloads]]
 
[[Category:Simucube_2]]
 
[[Category:Simucube_2]]
−
 
+
[[Category:Software]]
−
[[Category:Simucube_2]]
+

Latest revision as of 10:16, 5 July 2024

Simucube 2 User Guide[edit | edit source]

The Simucube 2 User Guide is available here: Simucube 2 User Guide.pdf


Simucube 2 True Drive files[edit | edit source]

Please note that this version history table only lists collected changes after each publicly released version.

Date True Drive Release Download link Description
July 5th, 2024 2024.7.1 hotfix Simucube 2 True Drive

Changes and fixes - 2024.7.1 hotfix

  • Reconstruction Filter can be turned off again.
  • Prevent possible 485001 fault on servo drive on device startup. This is harmless out of range parameter write attempt if default profile stored on device contained 2024.5 recon filter v2 beta testing value. In such case the Reconstruction Filter V2 value is set to 4.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

July 2nd, 2024 2024.7 Simucube 2 True Drive

Changes and fixes

  • Official release of Reconstruction Filter V2. It replaces the original Reconstruction Filter. Profile parameter is adjusted automatically when loading a profile with V1 data, but no exact match is achieved.
  • Debug log always logs some particular events that were not logged before.
  • Add wireless wheel module version to debug log.
  • Simplify logic on how Nm based value is shown in the UI for maximum torque, and remove unneeded current value.
  • Fix a crash when adding a new offline profile as the last one in the list.
  • Improve FFB effect status indicator when 360 Hz mode is used by iRacing.
  • Fix error where no faults were shown in the user interface in some fault situations on device. Issue was introduced in 2024.1 release.

Known issues

  • Torque level will always show 40% / 10 Nm when opening edit FFB dialog. This issue was fixed in a silent fix, download and install 2024.7 again.
  • Reconstruction filter cannot be turned off completely - selecting "off" will actually use a very smooth setting.

Please send us feedback via the new feedback button!

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

May 29th, 2024 2024.5 + Reconstruction Filter V2 testing Simucube 2 True Drive

Changes and fixes

  • Experimental testing of Reconstruction Filter V2. Test instructions and feedback instructions on our Community Forum or in Simucube Discord.

Please send us feedback via the new feedback button!

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

May 9th, 2024 2024.5 Simucube 2 True Drive

Changes and fixes

  • Improved indicators of different FFB modes by adding them to the Status tab.
  • Fix some mis-programmed units to correctly identify themselves as Pro.
  • Automatically restart the 360 Hz mode FFB generation if game is sending data for it.
  • Improve reliability of the offline profile list to not have it accidentally delete existing files. Renaming a profile by just changing its letter case will not be possible anymore (software prevents it now), but workaround is to rename twice via a temporary new name.

Please send us feedback via the new feedback button!

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

March 12th, 2024 2024.3 Simucube 2 True Drive

Note


Some people are reporting that Windows Defender flags the downloaded file as a virus. We are investigating, there seems to be a number of reports of Defender having false detections on exactly this recently. Virustotal.com does not find any viruses on the file.


Changes and fixes

  • Additional styling for True Drive for some UI elements that still followed Windows color, resulting in sub-optimal colors.
  • Install script does not clear out Automatic High Torque Mode and other registry-based settings anymore.
  • Fix a potential but rare issue where it was impossible to turn the torque clipping notification off.
  • Fix a bug where renaming offline profile by just changing letter case resulted in a deletion of that offline profile file.


New feature

  • Support for high data rate mode for games to send FFB signal in batches. The last tab in True Drive will indicate HighDataRateFFB when the mode is active.
  • This FFB mode will be enabled in iRacing patch, release date TBD.
  • Recommendation to tune the Reconstruction Filter to 1 or even to OFF to get full benefit of higher FFB detail.


Please send us feedback via the new feedback button!

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

January 31st, 2024 2024.1 Simucube 2 True Drive

Note Automatic high torque mode has to be set up again after updating to this release.


Changes and fixes

  • New UI style for True Drive
    • Some minor UI elements still have old style, those will get fixes later
  • Offline profile management improvements
    • Offline profile selection will track the last action made in the menu
    • Offline profiles are alphabetically sorted
  • Simucube Wireless Wheels are not anymore disconnected at all if a game is running and has created FFB effects
    • Previous behavior was that wheel wasn't supposed to disconnect if game actively sent new data, i.e. driver was on track
  • The Torque Clipping audible notification works again
  • Add some decimal points to analog axis status data on the first tab


FFB development testing as beta feature

  • New Experimental FFB filters menu
    • Feature enables trying out new things without having them saved into actual profiles
    • Access the feature from the first tab
    • Features will have to be re-applied to device after any profile change/update


FFB changes

  • New experimental/beta FFB setting: Angle-based torque reduction
    • Reduces FFB if wheel has turned for over 110 degrees, helps driver to resume full control of the car after a spin
    • Access setting via the the experimental menu
    • Send feedback via the feedback button
  • Motor tuning
    • Motor tuning has returned to that of the 2023.10 release. We will continue the work that was released in 2023.12 testing release in Discord.


Bug fixes

  • Simucube Wireless Wheels are not disconnected due to one hour time-out if any button is being used on the wheel, regardless if games are running or not.


Please send us feedback via the new feedback button!

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

November 6th, 2023 2023.10.1 Simucube 2 True Drive

Hotfix release

Please send us feedback via the new feedback button!

Changes and fixes

  • Analog axis data from wireless wheel or from Accessory Port is now shown correctly in the Overview tab

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

October 27th, 2023 2023.10 Simucube 2 True Drive

This release is a start of a series of updates to Simucube 2. Follow our progress at at our landing page and Trello.

Please send us feedback via the new feedback button!

Changes and fixes

  • Add new FFB setting: Centering Spring. This new effect that also works in-game, can be used to add self-aligning torque to the FFB, and it makes some old games that only had vibration effects more intuitive to drive.
  • Internal firmware FFB scaling change. Maximum Strength setting should not affect bumpstops anymore. This change should not change FFB feel.
  • Add some new Ascher Racing wheel images.
  • Remove unused code and some UI options that were not used.
  • Add feedback button that focuses on the new features.
  • Remove "Report Issue" feature from the feedback dialog.
  • Various small UI adjustments including making space on the Overview tab for some new features.


Known issue - Analog axis data from wireless wheel or from Accessory Port are not shown correctly in the Overview tab.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

February 15th, 2023 2023.2 Simucube 2 True Drive
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.

Changes and fixes

  • Further reduce audible knocks in the DirectInput Damping effect.
  • Fix stability of DirectInput Damping effect in some games.
  • Remove game-generated torque when bumbstop is deemed to cause unsafe torque jolt. This could happen when user changes FFB parameters from True Drive while the wheel is turned to be near the bumpstop, and a game is running. This fixes possibility of a runaway wheel in these situations.
  • Added function to duplicate an offline profile.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

January 13th, 2023 2023.1 Simucube 2 True Drive
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.

Changes and fixes

  • Reduce audible knocks in the DirectInput Damping effect. The issue was introduced in 2022.11 release.
  • Resetting FFB parameters in Simucube Tuning Button mode works for all parameters without 485001 fault.
  • Fix an issue where some Simucube Wireless Wheel 2 based wheels (e.g. Ascher Racing F64-SC V3) had a button configuration that was not working as expected.
  • Eliminate a rare application crash in True Drive.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

December 10th, 2022 2022.11 Simucube 2 True Drive
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.


Changes and fixes - General

  • Add more debug events of wireless wheels
  • Fixed issue with Simucube Button mode when resetting settings back to as they were.
  • Fix the wheel rotated over endstop LED notification to work correctly.
  • ESC button does not hide the offline profiles list anymore.
  • Mapping wireless wheel buttons to same buttons as a shifter on the Accessory Port works again.
  • Wireless wheel automatic idle disconnect does not happen if any wireless wheel button has been pressed during last hour.

Changes and fixes - USB and FFB

  • USB descriptor was tuned to make device compatible with Linux.
    • There will be no official Linux builds or support.
    • We aim to add a wiki page to explain how to work with Linux.
  • Descriptor changes caused changes in FFB effects that are used by mainly older games:
    • Re-tuned DirectInput Friction and Damping effects to utilize all parameters.
      • True Drive profiles will have 100% DirectInput Friction and Damping by default. It will be a good starting point for all games.
      • Older versions of True Drive could go unstable with 100% settings on these. Therefore older versions will load safe defaults for these effects if a profile made with this or later release is loaded.
    • Re-tuned DirectInput Spring effect to utilize all parameters.
    • Re-tuned DirectInput Sine Wave to work correctly in some situations where it did not work correctly.
    • Re-tuned DirectInput Triangle Wave, Square Wave, and Sawtooth effects to work correctly.
  • FFB Device Gain set by the game does not affect bumpstops anymore.
  • Individual gain parameter of the effects are now respected as per USB Physical Device standards.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

July 4th, 2022 2022.7 Simucube 2 True Drive
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.


Changes and fixes - Wireless Wheels

  • Added event log details about reason (connection loss, idle timeout, manual disconnection) why wireless wheel was disconnected.

Changes and fixes - True Drive

  • Using Simple Mode profiles populate all FFB parameters correctly to device. Bug was introduced some time after Paddock release.
  • Renaming offline profile to same name as before and clicking OK does not delete the profile anymore.
  • It is not possible to set empty or only white space password for profile editing.
  • Changing profile settings does not cause the save settings to Simucube -button to blink on hardware settings tab anymore.
  • Installer will detect and ask to close running True Drive before attempting to update.
  • Device ID content contains device temperature and other things for debug purposes.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

May 2nd, 2022 2022.5 Simucube 2 True Drive
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.


Changes and fixes - Wireless Wheels

  • Definitive fix for greyed out Wireless Wheels tab with "Wireless Wheel Receiver not detected" issue

Other improvements and changes

  • Remove unneeded anonymous opt-in device performance telemetry data collection
  • Add useful anonymous opt-in device performance telemetry data collection (fault codes etc.)
  • Increase reliability of Hiperface encoder initialization on device start. This may affect some Simucube 2 Ultimate units only.


Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

February 22nd, 2022 2022.2 Simucube 2 True Drive
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.


Changes and fixes - Wireless Wheels

  • More fix attempts at solving the Simucube Wireless Wheel Receiver not starting up in releases 2021.11 or 2021.12.
    • Note: Restart of the Simucube 2 might be required after servo drive firmware update to get Wireless Wheel receiver working.
    • Issue still does not seem to be solved for every Simucube 2 device.


Other improvements

  • Reduce/eliminate the chance of audibly buzzing motor in Safe Torque mode.
  • Improve torque control performance
    • Improve precision/smoothness of sinusoidal current waveforms.
    • Eliminate audible noise glitches that appeared in certain situations.
    • Eliminate the chance of torque glitch at transition between High Torque to Safe Torque modes.
  • Eliminate potential chance of fault with 485001 error on first usage(s) of the product.


Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msvc dll errors when you try to start True Drive.

December 16th, 2021 2021.12 Simucube 2 True Drive
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.

Changes and fixes

Following bugs were introduced in 2021.11 release and are fixed:

  • Fix FFB effects not starting correctly if device is started when game (like iRacing) is running.
  • Fix rare fault where the wireless wheel receiver module is not detected on device start.
  • Fix device not going to firmware update mode if E-stop button is pressed.

Other changes:

  • Move & regroup some buttons in True Drive.
  • Add back the missing active DirectInput effect indicators in the Edit FFB dialog.
  • Properly pop up firmware update/downgrade dialog in downgrade situations.
  • Show correct Offline or Paddock profile name (instead of Safe Profile) active after setting default profile and restarting device.
  • Add UI for starting in window/with tray icon/minimized to tray, and fix starting minimized to tray to work.
  • Add UI for starting / not starting True Drive on Windows user login.
  • Default wheel image is loaded from Documents/Simucube 2/wheels/wheelimage.png which persists over software updates.
  • Add automatic update checking and new version availability indicator.

Device identity fixes

  • Small number of Simucube 2 Sport units that incorrectly identify themselves as Pro are fixed as Sport
  • Small number of Simucube 2 Pro units that incorrectly identify themselves as Sport are fixed as Pro
    • Note: Identity changes after saving settings to device memory at least once, and then rebooting the device
    • Re-assigning controls in games will be required for the small number of affected units.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msv dll errors when you try to start True Drive.

November 27th, 2021 2021.11 + hotfix Simucube 2 True Drive
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.

Known issues in 2021.11 releases

  • FFB effects not starting correctly if device is started when game (like iRacing) is running. Workaround: iRacing Options -> FFB off -> Done -> Options -> FFB on -> Done.
  • Simucube Wireless Wheel receiver module is sometimes not detected device startup. Workaround: Power off and power on again.

Hotfix changes and fixes

  • Missing fix from last release: True Drive Paddock will respect the user's setting of redirecting to My Profiles in Paddock. Setting for this is available in Paddock (Click your user -> edit profile), and default is to direct to My Profiles.
  • Wireless wheel images are first searched from Documents/Simucube 2/wheels, then install directory/wheels, and if not found, then the default image is shown
  • Wireless wheel image does not unload when user closes the custom image mapping dialog without having done any changes.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msv dll errors when you try to start True Drive.

November 26th, 2021 2021.11 (file removed, use later one)

Simucube firmware major rewrite

  • Supports only Paddock/Offline profiles
  • Migrate your Classic profiles to Paddock or to Offline Profiles with 2021.7 or 2021.9 release before updating to this release.
  • Compatibility to downgrade has been maintained, however Classic profiles are lost
  • Supports Simucucube Tuning Button functionality on Simucube Tahko GT-21 wheel
  • Supports Simucube Wireless Wheel 2 based wheels
  • This software release does not send any anonymous telemetry regardless of user's consent.

Installer

  • Software is installed via exe file
  • User's setting files and cached/offline profiles are stored into Documents/Simucube 2/cachedprofiles directory
  • Custom wheel images are to be stored in to Documents/Simucube 2/wheels directory. Remappping wheels might be required if custom mapping is used.
  • Firmware update/downgrade to the installed True Drive version is automated without the need to use command line parameters

Changes and fixes

  • Some reliability improvements in communicating with the servo drive at device startup
  • Fixed timing issue on True Drive startup which may have caused a mismatch between the profile on device < - > profile indicated by True Drive Paddock
  • Added a workaround for Raceroom Racing Experience bug (wheel spins on game exit).
  • Hide unneeded context menus in True Drive Paddock
  • Bugfix: True Drive Paddock will respect the user's setting of redirecting to My Profiles in Paddock. Setting for this is available in Paddock (Click your user -> edit profile), and default is to direct to My Profiles.
  • Wireless wheel tab does not accidentally close when pressing ESC button
  • Fix trayminimized command line parameter not working as intended
  • Remove nonworking "reload from Simucube" and "Start from Scratch" buttons from the last tab in True Drive. They are not needed with Paddock.
  • Bugfix: Make it possible to only enable High Torque Mode manually once the device has reached the Operational state.

Offline mode improvements

  • Added "save as default" button.
  • Added renaming of offline or cached Paddock profile.
  • Added confirmation for deletion of offline profile.
  • Readjusted UI to show more profiles at once.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msv dll errors when you try to start True Drive.

September 18th, 2021 2021.9 + True Drive Paddock Simucube 2 True Drive Includes Simucube 2 True Drive Paddock release

Changes and fixes - general

  • Added menu for importing settings from a classic profile when editing settings for Paddock profile.
  • Small additions to offline mode functionality.
  • In Paddock, added support for quickly trying out profiles without adding them to user's list of profiles.
  • Disabled saving&restoring of window position in the Paddock application to help a white screen on start -issues for some users. Saving the window position shall return in the future.
  • Set the True Drive Paddock to use software OpenGL rendering to fix issues with screen flicker and also to potentially solve the white screen issue.

Changes and fixes - servo drive

  • Re-instated some audible noise mitigations that were removed in 2021.8 release.
  • Added audible notifications for some future Simucube Wireless Wheel functions.

Changes and fixes - hardware support

  • Release supports Simucube 2 units manufactured after week 36/2021. Hardware change is a minor change to support alternative components to battle the global chip shortage.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msv dll errors when you try to start True Drive.

Note: Package was updated on September 18th to fix a software not starting -issue when trayminimized -parameter was used.

August 18th, 2021 2021.8 + True Drive Paddock Simucube 2 True Drive Includes Simucube 2 True Drive Paddock release

Changes and fixes - general

  • Access to True Drive Paddock has been enabled for all Simucube 2 racers!
  • Small tidy-ups and fixes in the True Drive User Interfaces
  • Added a friendly deprecation reminder for the True Drive Classic mode. Classic mode will be removed in an upcoming release.
  • Added Troubleshooting.txt for some common issues regarding True Drive not starting.
  • Fix device not starting or FFB dropout when driving -issues that occurred on a few Simucube 2 units in all firmwares since 2021.1 release and up
  • Change current measurements to as they were in 2020.10 release. Device may be slightly more noisy compared to other 2021.x releases. Improvements shall return in the next release.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msv dll errors when you try to start True Drive.

July 9th, 2021 2021.7 + True Drive Paddock Early Access Simucube 2 True Drive Includes Simucube 2 True Drive Paddock Early Access release

Changes and fixes - general

  • Telemetry consent change is being shown correctly in the True Drive.
  • Fixed an issue where the True Drive Classic moved the profile settings scroll area, making it very difficult to change steering angle in Expert mode.

Changes and fixes - True Drive Paddock

  • Rearranged indicator and button for High Torque Mode in True Drive Paddock.
  • Fix some random crashes
  • New feature: Set default profile to device. Device will start with Paddock profile settings if a default profile has been set from True Drive Paddock.
  • New feature: Offline mode. True Drive caches profiles that have been applied to device, and they can be used in offline mode.
  • Steering angle indicator will correctly track the real steering angle when a True Drive Paddock profile has been applied but Paddock has not yet sent any new profile to the device.
  • Button to conveniently access FFB settings has been added to My Profiles view.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msv dll errors when you try to start True Drive.

May 25th, 2021 2021.5 + True Drive Paddock Early Access Simucube 2 True Drive Includes Simucube 2 True Drive Paddock Early Access release

Changes and fixes - general

  • Adjusted servo drive tuning to fix rare device reboot issues for some units happening since 2021.1 release.
  • Switched to 64bit compiler for True Drive. Note that you might need to download 64bit version of the Microsoft Visual Studio 2019 redistributable package (link below).

Changes and fixes - True Drive Paddock

  • Fix crash when clicking save -button on the hardware tab in Paddock mode.
  • Fix some random crashes
  • Fix Paddock mode application always crashing on exit.
  • Change the steering angle in Paddock mode to track with assumed 900 degree steering angle if the online application has not yet sent any active profile to the device. Also the buttons and analog axises keep tracking in Paddock mode.
  • Fix application crash when exiting via tray icon.
  • Fix the tray icon options to work with also the paddock application.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package (64bit version) from Microsoft's server if you get msv dll errors when you try to start True Drive.

May 12th, 2021 2021.4_4 + True Drive Paddock Early Access Simucube 2 True Drive Simucube 2 True Drive Paddock Early Access release
  • Release is the same as 2021.4_4 but with Simucube 2 True Drive Paddock Early Access.
  • See our FAQ for details.
  • Community forum thread is here.
  • You can also leave feedback by clicking the Feedback button directly in True Drive.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package from Microsoft's server if you get msv dll errors when you try to start True Drive.

April 29th, 2021 2021.4_4 Simucube_2_True_Drive_2021.4_4.zip Hotfix

Changes and fixes

  • Fix potential crash in True Drive when it loads.

Note: Please download and install Microsoft's Visual Studio 2019 Redistributable package from Microsoft if you get msv_something.dll errors when you try to start True Drive.

April 18th, 2021 2021.4_3 (download removed, get later release) Hotfix for 2021.4 release

Changes and fixes

  • Fixed servo drive not updating -issue that happened on some devices in original 2021.4 release.
  • New feature: True Drive remembers its window position and size. Fixed to work in _3 release.

(still temporarily hosted on a 3rd-party service.)

April 16th, 2021 2021.4 (download removed, get later release) Recommended update for all Simucube Wireless Wheel users

Changes and fixes

  • Simucube Wireless Wheels: Fixed an issue that could cause wireless wheels buttons to stop registering in games in some very rare situations.
  • Servo drive tuning: Reverted some changes in 2021.1 release that increased the audible noise in some situations.
  • USB changes: Reverted USB interface changes in 2021.1 release that caused device disconnects and device not recognized -issue after PC reboot.
  • Added protections to firmware to prevent corrupt settings when more than allowed number of profiles are stored into "classic" profiles. More than 99 user-made classic profiles cannot be used anymore (they never worked properly anyway).
  • Simucube hardware revision is shown correctly in the UI.

Build system update

  • This and all later releases are built with Microsoft Visual C++ compiler. Fresh Windows installs need to have the runtime libraries installed. If you get DLL errors, please run the vcdredist_x86.exe installer.

Release supports Early Access of Simucube Profile Online

  • Profile Online Early Access is enabled for Simucube 2 R1 Sport/Pro drivers, and all Simucube 2 Ultimate drivers.
  • Profile Online Early Access will be released soon as a separate download.

How to use Profile Online and Classic modes

  • The _Online Early Access.exe file launches the online version, and if online mode is active, the online mode sends the active profile to the device.
  • If _Classic.exe is launched, Online mode is deactivated and classic-mode profiles can be used as backup. Note, that classic mode as-is will be removed in future version.
  • Migrating to Online profiles: Export each of normal profiles to separate .ini files and import them when creating new profiles in Online mode.
  • Save settings -button (for permanent settings saving) in Online Mode has been moved to the Hardware settings tab.

Note: Download is temporarily hosted on a 3rd-party site due to an unforeseen configuration issue.

January 31st, 2021 2021.1 Simucube_2_True_Drive_2021.1_repackage.zip NOTE
  • We are investigating a USB fault in this release version. Symptons are that device will require a restart after PC restart. Very rare sympton could also be that the device suddenly gets non-recognized even when just idling in Windows.

Bumpstop behavior fix

  • Changed bumpstops to avoid issue where the bumpstop force could be overcome by game-generated FFB in some cases.

Torque tuning changes and audible changes

  • Fix constant audible tone issue in some Simucube 2 Sport and Pro R2 units
  • Change the long beep of going to standby mode to more informative tone.
  • Adjust controller tuning to reduce other audible noises from the motor.
    • This will be tuned further based on feedback from this 2021.1 release.
October 2nd, 2020 2020.10 Simucube_2_True_Drive_2020.10.zip Release contains Wireless Wheel and bumpstop changes.

Forget all wireless wheels

  • Added function to forget all previously paired wireless wheels and tidied up the UI for this.

Bumbstops

  • Bumpstops begin at exactly the same angle that is indicated in the user interface. (old behavior was to be at 100% torque at that point, so bumpstop began earlier.)
  • Bumpstops are not affected by the constantly operating filters on the servo drive.

Other changes

  • Added a possible fix for some "stuck at waiting for the drive to get ready" -issues.
  • Added support for Simucube 2 Sport and Simucube 2 Pro manufactured after week 38/2020.
July 31st, 2020 2020.7 Simucube_2_True_Drive_2020.7.zip Release contains many fixes and changes.

Important fix for Simucube Wireless Wheels

  • Fixes too high battery consumption on some Simucube Wireless Wheels. Bug was introduced in release 2020.4.

Wireless wheel scan changes

  • Wireless wheel scanning is not required to be started/stopped. The confusing buttons in True Drive been replaced with clear list and restart scan -button.

Bumbstops

  • Bumpstop rework, including safety and ease-of-use changes
  • Bumpstop effect has been simplified. All bumbstop settings have 100% power, and there are three well-tuned settings (soft/medium/hard) available.
  • Bumbstop setting is now a per-profile setting.

Other changes

  • Internal device telemetry data sync event does not cause wheel torque to be at zero anymore. This mainly affected non-FFB game titles.
    • Only slight torque roughness can be felt during the data syncronization event, which should be much better than it was before.
  • Desktop centering spring has been significantly strengthened to make it more usable.
  • There is a button in the advanced tab that can be used to copy all device identification data (software versions and serial numbers) to clipboard.
  • Further fine tuning for high-DPI displays, with command line options small and large to give some options.
  • Profile export functionality: Drop-down menu selection for exporting all the profiles, or just the current profile.
  • Device status updates are not frozen anymore after unsuccesfully importing profiles (bad file or not a profile file). Credits to Nir Nave for finding the issue.
  • Internal fixes, tidyups and changes in the device firmware.
April 24th, 2020 2020.4 Simucube_2_True_Drive_2020.4.zip

Grainy feel fix

  • Some tuning parameters were changed in the servo drive to get back to 2020.1 behavior.

Small changes and fixes

  • Disconnection of a wireless wheel will not cause torque to be disabled, unless the wheel had a torque off switch configured.
  • After unlocking locked profile settings, they can be relocked again.
  • Audible beeps enabled/disabled checkbox also affects wireless wheel status beeps.
  • Physical sequental shifter connected to the D15 Accessory Port will map to same pins as the Simucube Wireless Wheel shifter paddles. This can be configured per-profile.
  • There is a command line option 'trayminimized' to launch True Drive to Tray Icon in minimized state (window is not shown).
  • Remove Simucube 1 overvoltage fault detection that was sometimes triggered when it was not actually the fault cause.
  • Added detection of possibly low wireless wheel battery in some situations where battery voltage remains high but the battery voltage would drop under load.

Upcoming in the next releases

  • We decided to release 2020.4 due to some important fixes, and these features were not completed in time:
  • Bumpstop rework, including safety and ease-of-use changes
    • Bumpstop effect has been simplified. All bumbstop settings have 100% power, and there are three well-tuned settings (soft/medium/hard) available.
    • Bumbstop setting is now a per-profile setting.
  • Internal device telemetry data sync event does not cause wheel torque to be at zero anymore. This mainly affected non-FFB game titles.
March 29th, 2020 2020.3 Simucube_2_True_Drive_2020.3.zip Small changes and fixes
  • Automatic Simucube Wireless Wheel idle disconnect - wheels will disconnect after 1h of inactivity to optimize battery life. Activity is monitored through wheel turning 10 degrees or more. Also the disconnect is not allowed to happen if there are FFB effects in use.
  • Built with Qt 5.14.1 - True Drive should scale better on high-DPI displays
  • Drivers can set password protection for profile settings. This feature is especially useful for commercial sim operators - if a password is set, visitors can't make unwanted adjustments.
  • Brief display of wrongly showing 2.56 V for wireless wheel voltage when connecting a wireless wheel is fixed.
  • Sometimes impossible to click Re-enable Torque button is now always possible.

Automatic High Torque Mode

  • Drivers can set the High Torque Mode to be enabled automatically on device start.
  • If automatic High Torque Mode has been enabled, the standby mode functionality including the beeps are disabled as well.
  • For these to work, True Drive must be running on the computer.
  • There is a command line option 'tray' to launch True Drive to Tray Icon.
February 14th, 2020 2020.1 Simucube_2_True_Drive_2020.1.zip Note: We are changing to simpler year+version format with this release.

Changes and fixes

  • It is possible to save No as the answer to device telemetry consent.
  • Add an option to allow mouse wheel scroll to change profile settings.
  • Reduce True Drive CPU consumption when window is activated.
  • Additional color indicator if wireless wheel battery is low.
  • Reduced volume of audible notification beeps.

Wheel centering fixes and changes

  • Fix wheel centering changing 360 degrees sometimes.
  • It is possible to quickly reset steering center for just temporarily again.
  • Factory-calibrated center point will be invalid after this update, users must set a new wheel centerpoint upon first use.

Simucube Wireless wheel image management

  • By default, wheels/wheelimage.png is loaded.
  • If a wireless wheel is connected, a short-named wireless wheel png is loaded from /wheels directory.
  • Some default wireless wheel images are supplied with the software.
    • User interface tooltip will say which file is being tried to load.
  • Right-clicking the wheel image in True Drive, the Driver is able to map/unmap wheel images to individual wireless wheels.

As previously, the wheel images must be 400x400px transparent PNG files.

Date True Drive version Download link Description
November 15th, 2019 1.0.13 simucube_2_true_drive_v1.0.13.zip Hotfix
  • Analog axis invert setting didn't work in original 1.0.12 release.
  • Standby mode LED functionality was not working correctly.
November 15th, 2019 1.0.12 unavailable due to 1.0.13 hotfix Important changes
  • The motor idle beeps have changed. The device will go to automatic standby mode if there is no torque.
    • First idle beep will be after 7 minutes. Second beep will be 1 minute after that. Third long beep will be 1 minute after that which will activate standby mode.
    • User can turn the wheel with fast left-right movement to prevent automatic standby.
    • From standby mode, normal operation will be resumed via cycling the Safe Torque Off button or via a button in True Drive software.
  • Bug where the Simucube Wireless Wheel button ordering did not match from wheel model to another as expected is fixed.
    • Note: Users might need to reassign controls when using Simucube Wireless Wheels.

New features

  • Telemetry data collection with opt-in to help us create even better product/features

Other fixes and changes

  • Resonance issue with some wheels is fixed.
    • Notable wheel that was affected was the Simulaje F1S wheel which resonated sometimes especially when not in High Torque Mode.
    • Nothing wrong with the wheel. We want to thank Augury Simulations for providing a wheel for testing.
  • Additional fix where the profile selection dropdown didn't match the visible profile settings in some cases.
  • E-stop status is being tracked also before the servo drive is initialized fully. Also more fault information is being shown.
  • Using mouse wheel to scroll up/down the profile settings dialog does not change the profile settings unless user clicks the setting first.
  • Better filtering of analog inputs in the Accessory port.
September 26th, 2019 1.0.10 simucube_2_true_drive_v1.0.10.zip New Simple User Interface mode
  • This mode will make setting up initial profile parameters easier for new users.
  • Advanced users do have access to all parameters as previously.
  • NOTE: Going back to Simple mode from either previously made profile or a new Advanced-mode profile will reset parameters to those in Simple Mode.
  • Added profiles templates for Project Cars 1 and 2 - but with quite default parameters, as these titles have so much going on also within 3rd party FFB adjustments.

Fixes

  • DirectInput Spring effect now follows the effect's magnitude parameter
  • New attempt to reduce very rare communication errors between the servo drive and Simucube interface.
  • Adjusted template profile for Truck Simulator titles.
  • A few of Simucube 2 Pro units show as Sport units. This firmware (and later versions) fix this for the known serial numbers that this has happened to.
    • Note: reassigning controls in games will be required too, as the USB ID of the device changes.
September 6th, 2019 1.0.8 simucube_2_true_drive_v1.0.8.zip Changes and fixes
  • The major bug that required Simucube 2 to be restarted after a PC restart is fixed.
  • Attempt to reduce very rare communication errors between the servo drive and Simucube interface.
  • Fine tuned device internal temperature monitoring.
  • Fixed an issue where the first attempt to select another profile in True Drive did not always work.
  • Fixed an issue where there might sometimes be a momentary disconnection in True Drive just after adding a new profile.
  • Minor UI fixes:
    • Note that Simucube 2 from factory-new, must have E-stop not pressed before the first firmware update.
    • Make all buttons in the UI slightly larger.
  • Added template profiles for Truck Simulator titles, Assetto Corsa and Assetto Corsa Competizione (however these are not extensively tested).
July 19th, 2019 1.0.7 simucube_2_true_drive_v1.0.7.zip New Features / Improvements
  • Template profiles and help for games when adding a new profile
  • Less CPU consumption in True Drive via slowing down the wheel UI icon updates if the window is not active or if the first tab is not the active tab
  • Reduced audible motor noise in all models
  • Reduced volume of audible beeps
  • Idle beeping now every four minutes (was every two minutes)

Bug fixes

  • Bumpstop damping should no longer cause oscillation near endstop boundary
  • Fixed Ultra Low Latency implementation issue, scale has changed slightly
  • Fixed audible resonance for some Ultimate owners

Known issues

  • Temporary wheel center setting is still disabled
  • Upon startup wheel angle might jump +-360 degrees, workaround is to re-center wheel in True Drive
  • Simucube 2 device requires a separate restart after a reboot in this and every earlier version. Symptom is a hangup of a game or the True Drive software upon their startup.

Notes

  • Due to Ultra Low Latency scale change the setting may need to be re-tuned in some configurations
  • Safety related beeps are not muted when disabling device sound notifications. Instead some non-safety critical sounds, such as saturation notification and low wheel battery warning gets muted.
June 6th, 2019 1.0.3 simucube_2_true_drive_v1.0.3.zip Bug fixes
  • Torque commands created by ISI/gMotor games (rFactor2, RaceRoom, ...) were not filtered at all. Now they are filtered.
  • Torque commands made by other than Constant Torque effect were not clearing the "idle torque" flag on servo drive, causing drive beep while driving. Affected ETS2 and maybe some other games.

Known issues

  • Bumpstop effect damping does not work or might produce unexpected effect. The effect is disabled as default.
  • Temporary wheel center setting did not work correctly after some last minute safety fixes. Therefore, it is impossible to set a temporary wheel centerpoint in this version. Setting wheel centerpoint permanently does work.
  • Simucube 2 device requires a separate restart after a reboot in this and every earlier version. Symptom is a hangup of a game or the True Drive software upon their startup.
May 28th, 2019 1.0.2 simucube_2_true_drive_v1.0.2.zip Initial release.

Known issues

  • Bumpstop effect damping does not work or might produce unexpected effect. The effect is disabled as default.
  • Temporary wheel center setting did not work correctly after some last minute safety fixes. Therefore, it is impossible to set a temporary wheel centerpoint in this version. Setting wheel centerpoint permanently does work.
Retrieved from "https://granitedevices.com/w/index.php?title=Simucube_2_True_Drive_releases&oldid=7811"