Revision as of 18:58, 15 June 2013
This page lists available mating connectors, accessories and spare parts for Argon (servo drive). Most parts or equivalents are available from large number of distributors. Feel free to extend this list.
Connectors
J1 connector
| Description |
Manufacturer |
Part number |
Distributors and order codes
|
| PLUG, D, SOLDER, 15WAY |
MULTICOMP |
5501-15PA-02-F1 |
|
J1 connector backshell
| Description |
Manufacturer |
Part number |
Distributors and order codes
|
| BACKSHELL, D, GREY, 15WAY |
MH CONNECTORS |
DPPK15-GREY-K |
|
J3 connector
This part is included with Argon package.
| Description |
Manufacturer |
Part number |
Distributors and order codes
|
| 3 pole 0.2" pitch terminal
|
On Shore Technology Inc
|
OSTTJ035153
|
|
J4 connector
This part is included with Argon package.
| Description |
Manufacturer |
Part number |
Distributors and order codes
|
| 10 pole 0.2" pitch terminal
|
On Shore Technology Inc
|
OSTTJ105153
|
|
J5 connector
Example of DIN rail attachable IDC terminal block/breakout board.
Mating connector type is 0.1" pitch 26 pin IDC ribbon cable socket, see example (pdf).
| Description |
Manufacturer |
Part number |
Distributors and order codes
|
| SOCKET, IDC, 2.54MM, 26WAY |
AMPHENOL |
T812126A100CEU |
|
| SOCKET, IDC, WITH S/RELIEF, 26WAY |
MULTICOMP |
MC6FD026-30P1 |
|
Accessories
| Description |
Manufacturer |
Part number |
Distributors and order codes
|
| IDC terminal block, 26WAY |
Camden boss |
CIM/202426W-IDCS |
|
Heat sinks & cooling
| Description |
Manufacturer |
Part number |
Distributors and order codes
|
| Half brick heatsink. Up to 4 pcs of standard half brick heat sinks can be fitted to drive to improve cooling and increase maximum power output. Iinstall with thermal grease. |
CUI Inc |
VHS-95 |
|
