Difference between revisions of "SMV2BRK"
From Granite Devices Knowledge Wiki
(Created page with "thumb SMV2BRK is a product name for for SimpleMotion V2 break out board. The purpose of SMV2BRK is to: *Terminate the RS485 bus (be the...") |
(No difference)
|
Revision as of 20:15, 30 October 2014
SMV2BRK is a product name for for SimpleMotion V2 break out board. The purpose of SMV2BRK is to:
- Terminate the RS485 bus (be the last device on the bus with proper termination impedance)
- Break out the enable and STO signals for easy wiring through wire terminals
Usage
SMV2BRK is intented to be wired to E-stop button of the motion control system. The following diagram illustrates the preferred wiring:
For testing purposes, or if no STO or Enable need to be controlled, SMV2BRK may be wired by short pieces of wire which always keep STO disabled and Enable active:
Availability
SMV2BRK is available through Granite Devices web shop.
