Difference between revisions of "ATOMI device model comparison"
From Granite Devices Knowledge Wiki
| [checked revision] | [checked revision] |
(→Feature comparison) |
(Tag: VisualEditor) |
||
| Line 30: | Line 30: | ||
|- | |- | ||
| Analog || - || - || Yes <sup>1</sup> | | Analog || - || - || Yes <sup>1</sup> | ||
| + | |- | ||
| + | |Quadrature | ||
| + | | - | ||
| + | | - | ||
| + | | - | ||
|- | |- | ||
| colspan="4" |'''Operation mode support''' | | colspan="4" |'''Operation mode support''' | ||
Revision as of 11:44, 8 May 2017
Feature comparison
| Feature | ATOMI DeepStepTM | ATOMI Standard | ATOMI Advanced |
|---|---|---|---|
| Motor support | |||
| Stepper motor, open loop | Yes | Yes | Yes |
| Stepper motor, sensorless closed loop | Yes | Yes | Yes |
| Stepper motor, sensored closed loop | - | Yes | Yes |
| AC/DC servo motor | - | Yes | Yes |
| Feedback support | |||
| Quadrature encoder | - | Yes | Yes |
| Hall sensors | - | - | - |
| Serial encoders | - | - | - |
| Setpoint support | |||
| SimpleMotionV2 | Yes | Yes | Yes |
| Step/dir | Yes | Yes | Yes |
| PWM, with or without direction bit | - | - | Yes |
| Analog | - | - | Yes 1 |
| Quadrature | - | - | - |
| Operation mode support | |||
| Position mode | Yes | Yes | Yes |
| Velocity mode | - | - | Yes |
| Torque mode | - | - | Yes |
| Other features | |||
| Acceleration and velocity feedforward | - | - | Yes |
| Auto setup | Yes | Yes | Yes |
| Homing | - | - | Yes |
| VFD out | Yes | Yes | Yes |
1) ±10 V analog setpoint requires external circuitry. ATOMI analog inputs are 0 - 3.3 V.
