Difference between revisions of "SimpleMotion parameter scales and units"
From Granite Devices Knowledge Wiki
(Created page with "List of most common SimpleMotion parameter units and scales: {| class="wikitable" |- ! Name in SimpleMotion !! Equivalent name in Granity !! Scale !! Remarks |- | SMP_TRAJ_PLA...") |
(No difference)
|
Latest revision as of 11:33, 8 February 2019
List of most common SimpleMotion parameter units and scales:
| Name in SimpleMotion | Equivalent name in Granity | Scale | Remarks |
|---|---|---|---|
| SMP_TRAJ_PLANNER_VEL | Velocity limitCVL | Number of encoder counts moved per 400µs control cycle multiplied by Setpoint dividerDIV (SMP_TRAJ_PLANNER_DIVIDER) | Same scale applies to homing velocity limit. See also Signal path of motor drive. |
| SMP_TRAJ_PLANNER_ACCEL | Acceleration limitCAL | Number of velocity limit counts (CVL) changed per 400µs control cycle multiplied by Setpoint dividerDIV (SMP_TRAJ_PLANNER_DIVIDER) | Same scale applies to homing acceleration limit limit. See also Signal path of motor drive. |
| SMP_TRAJ_PLANNER_STOP_DECEL | None | - | Parameter has no effect in current firmware |
| SMP_ACTUAL_BUS_VOLTAGE | Seen in Testing status lists | 10mV per count | |
| SMP_ACTUAL_TORQUE | Seen in Testing status lists | 1mA per count | |
| SMP_ACTUAL_VELOCITY_FB | Seen in Testing status lists | Number of encoder counts moved per 400µs control cycle |
