Setpoint signal

Reference signal is a signal that will be used as target value in control systems. Typical occurrencies of reference signals in GD products are:

• Position reference
• Velocity reference
• Torque reference

I.e. position reference value may be "1234" which could mean a target position of 1234 mm in some linear actuator. Or torque reference of 5.0 could mean that motor is asked to produce 5 Nm torque.

Physical reference signal types

Reference signals may have several representations in real world such as:

• Analog reference signal
• Pulse and direction signals
• PWM signal
• Serial communication command

In these cases there will be a conversion between input and output units. For example when using +/-10V reference as velocity reference, the relation betveen input to output types could be 1 Volt per 100 rpm (or any other scale).

Reference signal characteristics

	Analog	Pulse & dir or Quadrature	PWM	Network
Scale & range	Absolute (limited)	Incremental (infinite)	Absolute (limited)	Absolute (near infinite) Incremental (infinite)
Reference uses in motion control	Torque, velocity	Position, velocity	Torque, velocity	Position, torque, velocity, parameters
Pros	Widely used Easy to measure	Widely used Exact Noise robust	EMI noise robust Precise	High resolution & accuracy Reduce wiring More functions than just reference
Cons	EMI noise sensitive Offset & gain errors	Limited resolution at low frequency Need reference zeroing because incremental	Various "standards", sometimes incompatible	Many standards Usually incompatible with other standards

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.