SimpleMotion V2 compatible communication interface device
This page lists known good interface devices for SimpleMotion V2 bus.
Contents
Compatibility in theory
To communicate with SimpleMotion V2 bus, a RS485 serial port is needed. The requirements are:
- 460800 PBS bitrate support
- 8 data bits + 1 data bit
- Half duplex RS485 with 3 wires: ground, A, B
- Visible as serial port on a PC (COM port in Windows, /dev/ttyNNN in Unix)
List of tested devices
Known good devices
- SimpleMotion V2 USB adapter
- DIY SimpleMotion V2 adapter
- FTDI USB UART based RS485 adapters
Known incompatible devices
None yet
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
