Hard-stop homing

From Granite Devices Knowledge Wiki
Revision as of 14:10, 7 August 2013 by Tero K (Talk | contribs)


Jump to: navigation, search

Hard-stop homing is a method for homing/referencing the axis to a known absolute position. Hard-stop homing is just like normal home switch based homing but does not require any type of switch. Instead hard-stop homing detects the mechanical end of travel of the axis being homed. This is done by driving axis gently towards end of axis until motion stops due to mechanical block.

Hard-stop homing support

Example video of hard-stop homing with VSD-XE drive (and some random motion with absolue positioning).

Most of Granite Devicse drives support hard-stop homing as standard feature. In such models, it is possible to configure the maximum torque or force used, motion speed, and detection threshold of home point. It is also possible to enable the search of feedback device index pulse for more accurate homing. Index pulse is searched after mechanical end point has been detected.

Key properties

  • No switch needed - reduced wiring and increased reliablity
  • Very repeatable when done against stiff mechanical stop
  • Easy to setup

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.