Legend
| Color
|
| Supply pin
|
| Input pin
|
| Output pin
|
MX, MY, MZ, MA - Motor and encoder connectors
| Pin number |
Signal name |
Usage
|
| 1 |
SW |
Limit switch, shared for both directions
|
| 2 |
CHC / Homeswitch |
Encoder channel C (index) / homeswitch
|
| 3 |
CHB |
Encoder channel B
|
| 4 |
CHA |
Encoder channel A
|
| 5 |
+5 V |
5 V supply voltage to encoder
|
| 6 |
GND |
Encoder supply ground / 0 V
|
| 7 |
PH4 |
Motor phase 4
|
| 8 |
W / PH3 |
Motor phase 3 / Servo W
|
| 9 |
V / PH2 |
Motor phase 2 / Servo V
|
| 10 |
U / PH1 |
Motor phase 1 / Servo U
|
X1 - Granity and SimpleMotion V2 connector
X2 - Main setpoint connector
| Connect X2 only to 3.3V or 5V logic systems. |
X2 is main control and setpoint signal port consisting Global Enable input signal, Global Fault output signal, pulse and direction/PWM setpoint inputs and digital outputs for servo ready signals. X2 is directly wired to conform most common parallel port style pulse & direction CNC controllers.
| Pin number in header |
Pin number in D25 cable |
Signal name |
Typical usage
|
|
Pin number in header |
Pin number in D25 cable |
Signal name |
Typical usage
|
| 1 |
1 |
ENABLE |
Enable all axis (with or without chargepump) |
2 |
14 |
Homing |
Start homing for all axis
|
| 3 |
2 |
HSIN2_X |
Direction input X |
4 |
15 |
Global_GPO3 |
Global fault output
|
| 5 |
3 |
HSIN1_X |
Pulse/step input X |
6 |
16 |
PWM2ANA |
PWM to analogue converter input
|
| 7 |
4 |
HSIN2_Y |
Direction input Y |
8 |
17 |
AUX_IN |
Auxilary transistor input
|
| 9 |
5 |
HSIN1_Y |
Pulse/step input Y |
10 |
18 |
GND |
Ground
|
| 11 |
6 |
HSIN2_Z |
Direction input Z |
12 |
19 |
GND
|
| 13 |
7 |
HSIN1_Z |
Pulse/step input Z |
14 |
20 |
GND
|
| 15 |
8 |
HSIN2_A |
Direction input A |
16 |
21 |
GND
|
| 17 |
9 |
HSIN1_A |
Pulse/step input A |
18 |
22 |
GND
|
| 19 |
10 |
GPO1_X |
X axis servo ready signal |
20 |
23 |
GND
|
| 21 |
11 |
GPO1_Y |
Y axis servo ready signal |
22 |
24 |
GND
|
| 23 |
12 |
GPO1_Z |
Z axis servo ready signal |
24 |
25 |
GND
|
| 25 |
13 |
GPO1_A |
A axis servo ready signal |
26 |
N/A |
Not connected |
|
X3 - Additional setpoint and IO connector
| Connect X3 only to 3.3V or 5V logic systems. |
X3 is a second control and setpoint signal port addition to X2. X3 consists of analog setpoint signal inputs and additional digital I/O.
| Pin number in header |
Pin number in D25 cable |
Signal name |
Typical usage
|
|
Pin number in header |
Pin number in D25 cable |
Signal name |
Typical usage
|
| 1 |
1 |
GND |
GND / 0 V |
2 |
14 |
+5V |
+5 V supply
|
| 3 |
2 |
GND |
GND / 0 V |
4 |
15 |
Global_IO4 |
Global IO 4
|
| 5 |
3 |
AUX_OUT |
Buffered output for AUX_IN |
6 |
16 |
ANA_OUT |
PWM to analogue converter output, 0..5 V
|
| 7 |
4 |
X_GPI2 |
Enable positive X travel |
8 |
17 |
X_GPI3 |
Enable negative X travel
|
| 9 |
5 |
X_GPO4 |
X position within limits |
10 |
18 |
X_GPO2 |
X tracking error
|
| 11 |
6 |
X_ANAIN |
X analogue setpoint input |
12 |
19 |
Y_GPI2 |
Enable positive Y travel
|
| 13 |
7 |
Y_GPI3 |
Enable negative Y travel |
14 |
20 |
Y_GPO4 |
Y position within limits
|
| 15 |
8 |
Y_GPO2 |
Y tracking error |
16 |
21 |
Y_ANAIN |
Y analogue setpoint input
|
| 17 |
9 |
Z_GPI2 |
Enable positive Z travel |
18 |
22 |
Z_GPI3 |
Enable positive Z travel
|
| 19 |
10 |
Z_GPO4 |
Z position within limits |
20 |
23 |
Z_GPO2 |
Z tracking error
|
| 21 |
11 |
Z_ANAIN |
Z analogue setpoint input |
22 |
24 |
A_GPI2 |
Enable positive A travel
|
| 23 |
12 |
A_GPI3 |
Enable negative A travel |
24 |
25 |
A_GPO4 |
A position within limits
|
| 25 |
13 |
A_GPO2 |
A tracking error |
26 |
N/A |
A_ANAIN |
A analogue setpoint input
|
X4 - Power input and STO connector
X4 is three pin wire terminal for HV DC bus supply and Safe torque off.
| Pin number |
Signal name |
Usage |
Electrical
|
| 1 |
GND |
Ground |
|
| 2 |
STO |
Safe torque off |
3.3 - 48 V
|
| 3 |
HV+ |
Motor power supply, HV DC bus |
12 - 48 V
|
JP1 to JP4 - Encoder passthrough connector
JP1 to JP4 are pin headers for external encoder use.
| Pin number |
Signal name |
Usage
|
| 1 |
+5V |
+5 V supply
|
| 2 |
CHA |
Encoder channel A
|
| 3 |
GND |
GND / 0 V
|
| 4 |
CHB |
Encoder channel B
|
| 5 |
GND |
GND / 0 V
|
| 6 |
CHC |
Encoder channel C
|
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
