LinuxCNC
LinuxCNC, previously known as EMC2 a.k.a. Enhanced Machine Controller, is a popular CNC controller software that runs on a real-time Linux operating system. LinuxCNC is available for download at http://www.linuxcnc.org/.
Main features include
- Multiaxis G-code milling and turning
- Can operate motor drives in open loop and closed loop mode
- Can close the position loop inside the software by reading axis position information via feedback devices and outputting velocity setpoint signal to motor drives
- Various setpoint signal devices supported including:
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
