Servo drive configuration files
This page lists pre-made configuration files for various types of servo motors. Configuration files are provided to ease commissioning of a motor with GD servo drives.
 | These files should be used only as template or starting point to final configuration. Caution and safety guidelines must be accounted when applying these files. Uncontrolled motion or instability may happen. It's required to unmount motor shaft from any load before attempt configuration. |
Notice that motor will change behavior and tuning when mechanical load changes. The configuration files provided here are tuned without any mechanical mounted on motor shaft. Care must be taken and settings adjusted once motor is attached to load. Initial settings may be unstable and oscillate violently when motor is attached to load, or when something is different in the physical system (such as wiring or motor properties).
| Motor manufacturer | Motor model | Motor specs | Remarks | Drive | Download |
|---|---|---|---|---|---|
| KUKA / Roboter GmbH | 1FK6100-8AF91-1ZZ9-Z S09 | 3.77 kV, 9.50 A, 3000 rpm, Resolver feedback with 4 pole pairs (equals 8192 pulses/rev or 32768 counts/rev on Argon) | Motor form KUKA KR 150 industrial robot | Argon with Argon resolver adapter | Media:KUKA KR150 Argon drive settings.zip |
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
