Simucube 2 True Drive releases

Simucube 2 User Guide

The Simucube 2 User Guide is available here: Simucube 2 User Guide.pdf

Simucube 2 True Drive files

Please note that this version history table only lists collected changes after each publicly released version.

Date	True Drive version	Download link	Description
July 19th, 2019	1.0.7	simucube_2_true_drive_v1.0.7.zip	New Features / Improvements Template profiles and help for games when adding a new profile Less CPU consumption in True Drive via slowing down the wheel UI icon updates if the window is not active or if the first tab is not the active tab Reduced audible motor noise in all models Reduced volume of audible beeps Idle beeping now every four minutes (was every two minutes) Bug fixes Bumpstop damping should no longer cause oscillation near endstop boundary Fixed Ultra Low Latency implementation issue, scale has changed slightly Fixed audible resonance for some Ultimate owners Known issues Temporary wheel center setting is still disabled Upon startup wheel angle might jump +-360 degrees, workaround is to re-center wheel in True Drive Notes Due to Ultra Low Latency scale change the setting may need to be re-tuned in some configurations Safety related beeps are not muted when disabling device sound notifications. Instead some non-safety critical sounds, such as saturation notification and low wheel battery warning gets muted.
June 6th, 2019	1.0.3	simucube_2_true_drive_v1.0.3.zip	Bug fixes Torque commands created by ISI/gMotor games (rFactor2, RaceRoom, ...) were not filtered at all. Now they are filtered. Torque commands made by other than Constant Torque effect were not clearing the "idle torque" flag on servo drive, causing drive beep while driving. Affected ETS2 and maybe some other games. Known issues Bumpstop effect damping does not work or might produce unexpected effect. The effect is disabled as default. Temporary wheel center setting did not work correctly after some last minute safety fixes. Therefore, it is impossible to set a temporary wheel centerpoint in this version. Setting wheel centerpoint permanently does work.
May 28th, 2019	1.0.2	simucube_2_true_drive_v1.0.2.zip	Initial release. Known issues Bumpstop effect damping does not work or might produce unexpected effect. The effect is disabled as default. Temporary wheel center setting did not work correctly after some last minute safety fixes. Therefore, it is impossible to set a temporary wheel centerpoint in this version. Setting wheel centerpoint permanently does work.

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.