Argon user guide/Mating connectors and accessories
This page lists available mating connectors, accessories and spare parts for Argon (servo drive). Most parts or equivalents are available from large number of distributors. Feel free to extend this list.
Contents
Connectors
J1 connector
| Description | Manufacturer | Part number | Distributors and order codes |
|---|---|---|---|
| PLUG, D, SOLDER, 15WAY | MULTICOMP | 5501-15PA-02-F1 |
|
Accessories
| Description | Manufacturer | Part number | Distributors and order codes |
|---|---|---|---|
| D-SUB BACKSHELL, 15WAY | MH CONNECTORS | DPPK15-GREY-K |
|
J2 cable assemblies
Cable used for J2 should be shielded (S/FTP or FTP, not UTP) type and preferrably with standed wires.
| Description | Manufacturer | Part number | Distributors and order codes |
|---|---|---|---|
| Premium patch cable 0.5m | VIDEK | 3962-0.5 | Farnell 1525999 |
| Premium patch cable 1m | VIDEK | 3962-1 | |
| Premium patch cable 2m | VIDEK | 3962-2 | Farnell 1525753 |
| Premium patch cable 5m | VIDEK | 3962-5 | Farnell 1525755 |
| Premium patch cable 10m | VIDEK | 3962-10 | |
| Low cost patch cable 0.5m | VIDEK | 2992-0.5 | Farnell 1517504 |
| Low cost patch cable 1m | VIDEK | 2992-1 | |
| Low cost Patch cable 2m | VIDEK | 2992-2 | Farnell 1517506 |
| Low cost patch cable 5m | VIDEK | 2992-5 | Farnell 1517509 |
| Low cost patch cable 10m | VIDEK | 2992-10 | |
| Shielded patch cable 0.5m | Assman | A-MCSP-80005/B-R | Digikey AE10185-ND |
| Shielded patch cable 2m | Assman | A-MCSP-80020/B-R | Digikey AE9972-ND |
| Shielded patch cable 5m | Assman | A-MCSP-80050/B-R | Digikey AE9974-ND |
J3 connector
This part is included with Argon package.
| Description | Manufacturer | Part number | Distributors and order codes |
|---|---|---|---|
| 3 pole 0.2" pitch terminal | On Shore Technology Inc | OSTTJ035153 |
J4 connector
This part is included with Argon package.
| Description | Manufacturer | Part number | Distributors and order codes |
|---|---|---|---|
| 10 pole 0.2" pitch terminal | On Shore Technology Inc | OSTTJ105153 |
|
J5 connector
Mating connector type is 0.1" pitch 26 pin IDC ribbon cable socket, see example (pdf).
| Description | Manufacturer | Part number | Distributors and order codes |
|---|---|---|---|
| SOCKET, IDC, 2.54MM, 26WAY | AMPHENOL | T812126A100CEU |
|
| SOCKET, IDC, WITH S/RELIEF, 26WAY | MULTICOMP | MC6FD026-30P1 |
|
Accessories
| Description | Manufacturer | Part number | Distributors and order codes |
|---|---|---|---|
| IDC terminal block, 26WAY | Camden boss | CIM/202426W-IDCS |
|
Heat sinks & cooling
| Description | Manufacturer | Part number | Distributors and order codes |
|---|---|---|---|
| Half brick heatsink. Up to 4 pcs of standard half brick heat sinks can be fitted to drive to improve cooling and increase maximum power output. Iinstall with thermal grease. | CUI Inc | VHS-95 |
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
