Acquiring VSD-E/XE fault reason details

From Granite Devices Knowledge Wiki
Revision as of 11:57, 21 March 2013 by Tero K (Talk | contribs) (Reading fault location)


Jump to: navigation, search

This article describes how to use TweakTool to read fault location parameter from drive to examine the detailed reason of drive fault.

TweakTool

Tweak tool is a utily to read/write raw parameters from drive by using the USB adapter. TweakTool can be downloaded from this link. The application does not require installing, just extract the ZIP file to local disc.

Reading fault location

Preparations

  1. Remove any cable from drive CMD port (the 16 pin flat cable)
  2. Follow instructions from 1-5 in TweakTool screen in order to be able to communicate to drive (see screenshot below). You may need to set Force SPI mode with GDtool if it's not selected.
  3. Close GDtool if it's is running
  4. Launch TweakTool_1.0.exe

Reading fault location

These numbers are referencing to the image below.

  1. Enter 15440 to parameter number
  2. Click Read parameter
  3. Observe that "Command OK" reads in the status bar. If some error is reported, connection didn't succeed. Ensure that earlier steps are followed.
  4. Fault location value should now display in parameter value

Tweaktool usage.png

Fault location expanations

Value Meaning
1 Overcurrent > 24A
2 Overcurrent < -24A
10 PLL error
15 Illegal opcode
20 Misalign data
25 HW stack error
30 Logic undervoltage < 2.2V
35 Logic undervoltage < 2.7V
120 Short circuit
600 Overcurrent (user limit)
100,110 Loading config fail
200,210,220 Saving config fail
10000 No fault location info (after reset state)

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.