Analyzing torque mode effects

From Granite Devices Knowledge Wiki
Revision as of 18:28, 23 April 2016 by Tero K (Talk | contribs) (Created page with "Due to discussion about torque control differences between IONI firmware versions 1.4 and 1.5, we made a special versions of both firmware versions to allow analytical compari...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Due to discussion about torque control differences between IONI firmware versions 1.4 and 1.5, we made a special versions of both firmware versions to allow analytical comparison of torque output. If unexpected differences are noticed, please report us at Granite Devices support.

How to compare

Example of Tracking error on step response test with TBW and notch filter enabled
Example of Tracking error on step with TBW set to Unlimited and all other effects disabled

Analytical comparison is achieved by the means of Tracking error capture channel in Granity. This channel displays the difference between the pure unmodified user setpoint and realized actual torque. The difference scale is in millamperes.

Following parameters will modify the setpoint torque and cause the difference between actual and raw setpoint to grow:

  • Maximum peak powerMPP
  • Torque bandwidth limitTBW
  • Torque notch filter
  • Torque mode effects
  • Motor torque cogging & ripple compensation

If all effects are disabled and TBW is set Unlimited, then in the ideal case Tracking error would be straight line at zero. However, in practice some error will be there due to current sense noise and physically limited torque control bandwidth.

Firmware files

Use the firmware files here to do the comparison with Tracking error feature:

Older firmware versions don't have Tracking error scope in torque mode (will display only straight line of zero value).


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.