Argon user guide/J5 connector electrical interfacing

From Granite Devices Knowledge Wiki
< Argon user guide
Revision as of 23:06, 13 June 2013 by Tero K (Talk | contribs) (Supply)


Jump to: navigation, search

This article explains the internal circuity behind J5 connector of Argon servo drive.

Pin electrical categories=

Supply

Supply pins output a regulated 5V voltage to external circuits. GND pin is tied to J3 connector V- terminal.

Supply ratings
  • Output voltage 4.9-5.2 V
  • Maximum load 500 mA
  • Maximum injected current -10 mA

High speed digital input

The HSIN circuity inside the drive. Left side end represents J5 pins and right side continues to drive internal circuity.

HSIN is differential digital input capable of receiving digital signals up to 4 MHz.

Input ratings
  • Maximum voltage to +/- pins referenced to GND: -0.5 to 6V. Nominal 3.3 or 5.0V.
  • Maximum injected current +/- 10 mA
Wiring when driving using differential source
  • Positive (+) inputs: to positive outputs of source
  • Negative (-) inputs: to negative outputs of source
  • GND must be connected to source ground
Wiring when driving using single ended source (TTL, CMOS or open collector)
  • Positive (+) inputs: to positive outputs of source
  • Negative (-) inputs: leave floating
  • GND must be connected to source ground

Analog input

Digital output

Digital input


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.