Difference between revisions of "Feedback devices"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[unchecked revision][unchecked revision]
(Comparison)
Line 26: Line 26:
 
| No
 
| No
 
| High
 
| High
| Medium-high
+
| Medium to high
 
|-
 
|-
 
| Absolute encoder  
 
| Absolute encoder  
Line 33: Line 33:
 
| Yes (single or multiturn)
 
| Yes (single or multiturn)
 
| High
 
| High
| Medium-high
+
| Medium to high
 
|-
 
|-
 
| Resolver
 
| Resolver
Line 45: Line 45:
 
| Medium
 
| Medium
 
| Analog
 
| Analog
| Yes for velocity
+
| Yes (for velocity FB)
| -
+
| N/A
 
| Medium
 
| Medium
 
|-
 
|-
Line 56: Line 56:
 
| Low
 
| Low
 
|}
 
|}
 +
 
==See also==
 
==See also==
 
*[[Motor types]]
 
*[[Motor types]]
 
[[Category:Hardware]]
 
[[Category:Hardware]]

Revision as of 12:04, 18 April 2012

Feedback devices are mandatory part in closed loop systems thus typically found in servo motor applications. In motion control FB devices are used to get position or velocity information from motor or machine.

Shapes

Feedback devices come mainly in two shapes:

  • Rotary
  • Linear

Shape of device doesn't change their operation principle.

Feedback device types

Encoder

Quadrature encoders are nowadays the most common feedback device type in servo motors. Quadrature encoders are incremental sensors so they require position zeroing/homing to get absolute position feedback.

Another type of encoder is absolute encoder. Absolute encoders typically output serial data of absolute position thus they may not need to be zeroed. The drawback of absolute sensors is higher price and lower compatibility & interchangeability.

Resolver/synchro

Resolver is an analog technology based on rotary transformer that can provide absolute position (single turn absolute, for multiturn absolute position zeroing is still needed). Resolvers are good for harsh conditions but don't provide as high precision as encoders.

Tachometer

Tachometer is a small DC generator that outputs DC voltage proportional to rotation speed. It can be used as velocity feedback device but not as position sensor. Tachometers are often seen in dual-loop configurations with position sensor.

Hall sensors

Hall sensors are found in AC & BLDC motors only. Halls provide commutation information (drive current phase angle) for drive. Modern drives such as all GD drives don't require Hall sensors but can utilize them to make faster power-up possible. Hall sensors are too low resolution for position or high performance velocity control.

Comparison

Device Durability Outputs available Absolute Position feedback precision Velocity feedback precision
Incremental encoder Medium Quadrature, Serial, SinCos No High Medium to high
Absolute encoder Medium Serial, Cray signals Yes (single or multiturn) High Medium to high
Resolver High Analog, 6 wires Yes, single turn Medium Medium
Tachometer Medium Analog Yes (for velocity FB) N/A Medium
Hall Medium Digital outputs Yes Low Low

See also