Editing Granity user guide/Machine
Your changes will be displayed to readers once an authorized user accepts them. (help) |
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.
The edit can be undone.
Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 22: | Line 22: | ||
! Short [[GUI]] name !! [[GUI]] name !! Description !! How to use | ! Short [[GUI]] name !! [[GUI]] name !! Description !! How to use | ||
|- | |- | ||
− | | MT || Motor type || Motor type to be driven || Choose your [[motor types|motor type]]. | + | | MT || Motor type || Motor type to be driven || Choose your [[motor types|motor type]]. If motor is linear type, see [[configuring linear servo motor]]. |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
|- | |- | ||
| MPC || Pole count || Set motor magnetic pole count (not in DB motors) || Set number of magnetic poles present in the AC/BLDC motor according to motor specifications. If not specified, see [[Determining motor pole count]] or in case of linear motor, see [[Configuring linear servo motor]]. | | MPC || Pole count || Set motor magnetic pole count (not in DB motors) || Set number of magnetic poles present in the AC/BLDC motor according to motor specifications. If not specified, see [[Determining motor pole count]] or in case of linear motor, see [[Configuring linear servo motor]]. | ||
|- | |- | ||
− | | MCC || [[Motor peak and continuous current limits|Continuous current limit]] || Motor continuous current limit ([[Peak value of sine|peak value of sine]] in AC/BLDC modes, not RMS)|| rowspan= | + | | MCC || [[Motor peak and continuous current limits|Continuous current limit]] || Motor continuous current limit ([[Peak value of sine|peak value of sine]] in AC/BLDC modes, not RMS)|| rowspan=2|Use value from your motor data sheet or any lower value to reduce torque. If your AC/BLDC motor phase current is specified as RMS value, then multiply it with 1.41 to get peak value of sine. |
|- | |- | ||
| MMC || [[Motor peak and continuous current limits|Peak current limit]] || Motor peak current limit ([[Peak value of sine|peak value of sine]] in AC/BLDC modes, not RMS). Drive outputs this current to motor for max of 2 second duration and then falls back to the continuous limit (MCC). MCC will be also used if motor temperature modeling (see MTC) indicates maximum temperature. | | MMC || [[Motor peak and continuous current limits|Peak current limit]] || Motor peak current limit ([[Peak value of sine|peak value of sine]] in AC/BLDC modes, not RMS). Drive outputs this current to motor for max of 2 second duration and then falls back to the continuous limit (MCC). MCC will be also used if motor temperature modeling (see MTC) indicates maximum temperature. | ||
|- | |- | ||
− | | MR || Coil resistance || Motor [[phase-to-phase]] winding resistance|| rowspan= | + | | MR || Coil resistance || Motor [[phase-to-phase]] winding resistance|| rowspan=2|See motor data sheet and enter the value here. If unknown, see [[Tuning torque controller]]. |
|- | |- | ||
| ML || Coil inductance ||Motor [[phase-to-phase]] winding inductance | | ML || Coil inductance ||Motor [[phase-to-phase]] winding inductance | ||
Line 41: | Line 37: | ||
If not available, use formula 200*motor_weight (kg) as approximate, so a 2 kg motor would get a 400 second time constant. There is no guarantee of accuracy of this method. | If not available, use formula 200*motor_weight (kg) as approximate, so a 2 kg motor would get a 400 second time constant. There is no guarantee of accuracy of this method. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} | ||
Line 53: | Line 44: | ||
! Short [[GUI]] name !! [[GUI]] name !! Description !! How to use | ! Short [[GUI]] name !! [[GUI]] name !! Description !! How to use | ||
|- | |- | ||
− | | FBD || [[Feedback devices|Feedback device]] || Position feedback device type attached to the axis || Choose connected device type. | + | | FBD || [[Feedback devices|Feedback device]] || Position feedback device type attached to the axis || Choose connected device type. Use only the ones that are [[Argon specifications|currently supported]] in the firmware. Currently only Quadrature encoder 1 is supported. |
|- | |- | ||
| FBR || Feedback device resolution || Resolution of the feedback device per revolution || In case of [[quadrature]] encoder choose number of lines or pulses per revolution. Make sure to enter resolution of feedback device ''before'' 4x quadrature decoding (encoder real resolution is 4 times the number of lines per revolution). | | FBR || Feedback device resolution || Resolution of the feedback device per revolution || In case of [[quadrature]] encoder choose number of lines or pulses per revolution. Make sure to enter resolution of feedback device ''before'' 4x quadrature decoding (encoder real resolution is 4 times the number of lines per revolution). | ||
If limited motion range and [[Tracking error|tracking error fault]] after certain travel distance is observed, try dividing this parameter value by 4 or multiplying by 4. | If limited motion range and [[Tracking error|tracking error fault]] after certain travel distance is observed, try dividing this parameter value by 4 or multiplying by 4. | ||
− | |||
− | |||
|- | |- | ||
| FBI || Invert feedback direction || Set polarity of feedback device counting direction || Motor and feedback device must have same electrical positive rotation direction to make a stable servo system. If your system shows no stability (instant following error after a motor "jump"), try changing this setting. | | FBI || Invert feedback direction || Set polarity of feedback device counting direction || Motor and feedback device must have same electrical positive rotation direction to make a stable servo system. If your system shows no stability (instant following error after a motor "jump"), try changing this setting. | ||
Line 65: | Line 54: | ||
| FBH || [[Feedback devices|Hall sensors]] || Configure Hall sensors if available || If motor Hall sensors are connected and wires, choose option from the list to utilize them. | | FBH || [[Feedback devices|Hall sensors]] || Configure Hall sensors if available || If motor Hall sensors are connected and wires, choose option from the list to utilize them. | ||
|} | |} | ||
− | |||
− |