How to choose servo motors and drives

From Granite Devices Knowledge Wiki
Revision as of 13:26, 12 March 2014 by Tero K (Talk | contribs) (Choosing electromechanical parts)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Choosing suitable servo components for a linear motion machine is straightforward process. This article gives a method for choosing suitable servo motors and drives for a machine with linear axis, such as CNC, 3D printing or pick'n'place systems.

A typical lead screw driven linear axis comprising linear guides, lead screw and a motor. To drive this, a motor driver and power supply is needed.

Defining goals

The first step is to define goals of the system. Find numbers to the following questions:

  1. How much is the required linear force?
  2. How much is the maximum desired speed?
  3. What is the required accuracy (resolution, precision, repeatability)?
  4. What is the required stiffness / nature of mechanical load (stationary/vibrating)?

Choosing electromechanical parts

Choosing linear guides

Selection of linear guides have different choices to match desired speed range, stiffness, precision and cost. The following table summarizes most common choices with pros and cons:

Type Cost Precision Stiffness Speed capability
Round linear bearing (sliding) Low Low Low/moderate Medium/high
Round linear bearing (ball) Low/medium Medium Medium (Supported only at end points) Medium
Track linear guide Medium/high High High (Supported from whole length) Medium
Dovetail Low/medium Medium/high Medium/High Low
Roller Low/medium Medium Medium High

Choosing rotary-to-linear transmission

A typical solution to produce linear motion from rotary motor is to use a lead screw. There are mainly two kinds of lead screws: trapezoidal (sliding) and ball screw. Another common solution is to use belt or rack and pinion system.

Type Cost Precision Stiffness Speed capability
Trapezoidal screw Low Low Low/medium Medium
Ball screw (rolled) Medium Medium High Medium
Ball screw (ground) High High High Medium
Timing belt Low Low Low High
Rack and pinion Low Low Low High

Transmission ratio and it's effect to performance

The resolution of transmission comes mainly from the transmission ratio: how much linear motion is produced per one revolution of motor (i.e. pitch of lead screw). Typical screw transmissions are between 2 mm/turn to 10 mm/turn while typical timing belt or rack & pinion systems have ratio of 20 to 100 mm per turn.

Higher ratio leads to higher speed capability but same time reduces stiffness, linear force and precision and vice versa.

Choosing motor

Choosing motor drive


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.