Editing IONI & IONICUBE user guide/Mating connectors and accessories

{{SetIUGTitle|Mating connectors and accessories for IONI & IONICUBE}}
{{IoniManualNav}}This page lists examples of available mating connectors, accessories and spare parts for [[IONI]] drive. Most parts or equivalents are available from large number of distributors. You may use http://www.findchips.com/ to search the same or similar parts from alternative distributors.
==Recommended shopping list==
*Connectors and backshells for X6/X8 unless using a motor with pre-made encoder cables (like [[Granite Devices servo motors]])
*X1 cable (RJ45 cable)
*X4/X5 connectors and flat cable
**A flat cable to D-Sub 25 connector if direct connection to parallel port based PC CNC software is desired
*EMI filters
*24 VDC logic power supply
*HV DC bus power supply

See the list of example parts below.

==Connectors==
===X6 & X8 connector===
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| PLUG, D, SOLDER, 15WAY || MULTICOMP || 5501-15PA-02-F1 || 
*{{Farnell |1084673}}
|}
====Accessories====
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| D-SUB BACKSHELL, 15WAY|| MH CONNECTORS || DPPK15-GREY-K || 
*{{Farnell |470028}}
|}
===X1 connector===
====Cable assemblies====
Cable used for X1 should be shielded (S/FTP or FTP, ''not UTP'') type.
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| Premium patch cable 0.5m || VIDEK ||3962-0.5 || {{farnell|1525999}}
|-
| Premium patch cable 1m || VIDEK ||3962-1 || 
|-
| Premium patch cable 2m || VIDEK ||3962-2 || {{farnell|1525753}}
|-
| Premium patch cable 5m || VIDEK ||3962-5 || {{farnell|1525755}}
|-
| Premium patch cable 10m || VIDEK ||3962-10 || 
|-
| Shielded patch cable 0.5m || VIDEK ||2992-0.5 || {{farnell|1517504}}
|-
| Shielded patch cable 1m || VIDEK ||2992-1 || 
|-
| Shielded Patch cable 2m || VIDEK ||2992-2 || {{farnell|1517506}}
|-
| Shielded patch cable 5m || VIDEK ||2992-5 || {{farnell|1517509}}
|-
| Shielded patch cable 10m || VIDEK ||2992-10 || 
|- 
| Shielded patch cable 0.5m|| Assman || A-MCSP-80005/B-R|| {{digikey|A-MCSP-80005/B-R}}
|- 
| Shielded patch cable 1m|| Assman || A-MCSP-80005/Y-R|| {{digikey|A-MCSP-80010/Y-R}}
|- 
| Shielded patch cable 2m|| Assman || A-MCSP-80020/Y-R|| {{digikey|A-MCSP-80020/Y-R}}
|- 
| Shielded patch cable 3m|| Assman || A-MCSP-80050/Y-R|| {{digikey|A-MCSP-80030/Y-R}}
|- 
| Shielded patch cable 5m|| Assman || A-MCSP-80050/Y-R|| {{digikey|A-MCSP-80050/Y-R}}
|- 
| Shielded patch cable 10m|| Assman || A-MCSP-80050/Y-R|| {{digikey|A-MCSP-80100/Y-R}}
|}
====Accessories====
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| RJ45 break-out board with DIN rail fixture (convert RJ45 to screw terminals). Helpful for wiring STO and Enable wires. || Camden boss ||CIM/RJ45 || {{farnell|2211819}}
|}

===X7 and X9 connector===
These parts are included with IONICUBE 4 axis product.
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| 6 pole 5mm pitch terminal plug
| FCI
| 20020007-G061B01LF
| 
*{{Digikey |609-4182-ND	}}
|}

===X4 and X5 connector===
[[File:Idcterminal.png|thumb|Example of DIN rail attachable IDC terminal block/breakout board.]]
Mating connector type is 0.1" pitch 26 pin IDC ribbon cable socket, see [[Media:Idc_connector_data.pdf|example (pdf)]].
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| SOCKET, IDC, 2.54MM, 26WAY || AMPHENOL || T812126A100CEU || 
*{{Farnell |2215239}}
|-
| SOCKET, IDC, WITH S/RELIEF, 26WAY|| MULTICOMP || MC6FD026-30P1 || 
*{{Farnell |1099240}}
|-
| FLAT CABLE 26 WAY|| 3M ||3302/26 300SF ||{{digikey|MC26M-5-ND}}
|}
====Accessories====
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| IDC terminal block, 26WAY || Camden boss || CIM/202426W-IDCS || 
*{{Farnell|2211821}}
|-
| FLAT CABLE TO D-SUB 25 CONNECTOR || Sullins || SDS103-PRW2-M25-SN00-211||{{digikey|S9577-ND}}
|}

==[[Electromagnetic interference]] filtering==
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| [[EMI suppression cores|EMI suppression core]] for low frequency band || Laird ||LFB159079-000||{{digikey|240-2281-ND}}
|-
| [[EMI suppression cores|EMI suppression core]] for medium frequency band || Laird ||28B0616-000||{{digikey|240-2306-ND}}
|}

==Power supplies==
Before making decision on power supplies, see:
*[[IONI power supply schemes]]
*[[Estimating power need of motor drive system]]
===24V low power logic supply===
{| class="wikitable"
|-
! Description !! Manufacturer || Part number !! Distributors and order codes
|-
| 24 VDC power supply || TDK-Lambda ||LS35-24||{{digikey|285-1893-ND}}
|-
| 24 VDC DIN rail power supply || CUI Inc ||VDRS-20-24||{{digikey|102-2152-ND}}
|}

===HV DC high power motor supply===
{{:List of 24V power supplies}}
{{:List of 48V power supplies}}
{{next|[[IONI & IONICUBE user guide/LED indicators]]}}