Editing IONI Servo & Stepper Drive

{{Infobox drive
| name = IONI
| image=[[File:Finalioni2crop.JPG|290px]]
| modelno = IONI-11K000
| drivetype          = Servo & stepping motor drive
| motors = AC, DC, BLDC, Linear
| controlmodes = Position, Velocity, Torque
| production = Active production, started 2015
| voltage = 5 - 52 VDC 
| currentrange = 0.1 - 15A 
| feedbacksignals=[[Quadrature]] encoder
| referencesignals=[[Pulse and direction]], [[PWM]], [[Analog reference|Analog]], [[SimpleMotion V2]]
| configtool=[[Granity]]
| agencies=CE (EMC & LVD directives)
| 3dmodel=[[Media:IONI 3d models.zip|IGES & STEP]]
}}{{IoniManualNav|width=22em|notoc=1}}
'''IONI''' is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in [[Control modes|all three operating modes]]: position control, velocity control and torque control (torque mode only with servo motors). Applications of such control methods include

*Position control, such as CNC, robotics and 3D printing
*Velocity control, such as spindles or feeders
*Force / torque control, such as racing simulator wheel


[[File:Ioni drive blocks.png|500px]]


Commands to IONI drive can be delivered in many formats and from many sources, such as PC, PLC, microcontroller (i.e. Arduino,  MBED and OEM boards) or embedded computers like Raspberry Pi. IONI understands several forms of [[setpoint]] commands:

*Step & direction digital signals (typical stepper drive interface, good for position control)
*Analog +/-10V signal (good for speed or torque control)
*PWM signal (good for speed or torque control)
*RS485 serial bus (talks [[SimpleMotion V2]] bus protocol, open source library available)


==Supported motors==
As motor is not included, make sure that you have, or obtain a motor that is compatible with IONI. Learn more about [[motor types]].

===Servo motor requirements===
*Permanent magnet brush-DC, AC, brushless or linear motor
*Motor voltage rating 12-60 VDC (IONI supply voltage is 5 - 52 VDC)
*Motor current rating 0.5 - 15A (IONI maximum output is 15A)
*Servo motor must be equipped with an [[Feedback devices|incremental encoder]] (position sensor) with resolution of 100 to 1000000 pulses per revolution.

===Stepping motor requirements===

*Two-phase stepping motor with 0.5 - 10A current rating, no feedback device needed. Can be used in position and velocity control mode. Torque mode not possible. Stepper voltage rating is irrelevant, but generally lower voltage & higher current stepper is better.

===Unsuitable/non-optimum motors===
*Any non-permanent magnet motors: induction AC motor or DC motor with field coil - will not work
*Cheapest grade DC motor, such as one extracted from power drill - might not give satisfying performance
*Motor with very high voltage, such as 200 VAC AC servo motor - it will work if it has incremental encoder feedback, but maximum rotation speed is limited due to drive voltage. Consider [[Argon]] servo drive for motors above 100 volts rating.

==Features==
===State of the Art===
* [[High dynamic range torque control]]
* Wide range motor support, from DC, BLDC, AC and Linear, from 5 W to 500 W
* High functional density and cost efficiency
* [[3-level PWM vs 2-level PWM|3-level PWM output]] with reduced motor heating
* Automatically [[Measure motor resistance and inductance in Granity|measures motor inductance and resistance]] for easy setup

===Control===
* Input [[setpoint signal|setpoint signals]] including [[pulse and direction]], [[quadrature]], [[analog setpoint|analog]] and [[PWM]]
* Multidrop & multiaxis capable real-time [[SimpleMotion V2]] field bus for setup & control
* Internal axis homing function with sensorless [[Hard-stop homing|hard-stop operating mode]]

===Protections & Ruggedness===
* [[safe torque off|Safe torque off]]
* Prevent machine damage via I²t (motor temperature modeling), blocked motion and tracking error detection
* Industry leading ruggedness: over current, short circuit, over voltage, under voltage and over temperature protections, data/communication error detection
* [[Product warranty terms|Warranty]] 24 months
* [[Charge pump enable input]] for safety

==Applications==
*Industrial servo & stepping motor control
*Pick'n'place machines
*Precision robotics
*CNC
*Semiconductor handling
*Food & white goods
*Defense systems
*Racing & flight simulators

==Functionality and specifications==
See main article [[IONI specifications]].

==Documentation & user guides==
See the main article [[IONI & IONICUBE user guide]].

==Availability==
Shipping worldwide at [[Granite Devices web shop]].