Editing Motor types

[[File:Servomotor and feedback.png|thumb|Typical servo motor with encoder feedback]]
Position, velocity and torque/force control applications mainly rely on two main categories of motors: '''servo motors''' and '''stepping motors'''.

'''Servo motor''' is a electromechanical actuator with feedback allowing precision [[Closed loop|closed loop]] motion control and monitoring. Servo motor also enables precise torque limitation to gain safety.

'''Stepping motor''' is a low cost alternative to servo motors and can be operated without [[feedback devices]]. 
==Construction==
Servo motor consists two main parts:
*Motor part - typically electromagnetic device that produces torque or force when driven with current
*[[Feedback devices|Feedback device]] - typically electronic device that outputs measurement information such as shaft angle or velocity
Stepping motors can be used without any feedback device.
==Shapes==
Motors and feedback devices come mainly in two shapes:
*Rotary 
*Linear
Shape of motor doesn't change their electromechanical principle so both types of motors can be driven with same drives.
==Motor technologies==
List of electromagnetic motor part types.
===AC===
Typical AC (alternating current) servo motor is a 3 phase permanent magnet syncronous machine. This type of motors are driven by 3 wires each driving one phase coil. In ideal case 3 phase AC servo is driven by sinusoidal current waveforms that are synchronized to the permanent magnet rotor. 
===BLDC===
BLDC (brushless DC) is very similar to AC motor with only expection that it is desgined to be driven by trapezoidal current waveforms instead of sinusoidal. BLDC motors can always be driven with same drives regardless of current waveform matching.
===Brush DC===
Brush DC (direct current) motors typically have permanent magnet stator and rotor with mechanical commutator with brushes. 
===Stepping motor===
Stepper motors are high pole count permanent magnet brushless motors with 2 or 3 phase windings. High pole count enables position control without feedback devices but with several drawbacks such as risk of lost position.

==Comparison==
Comparison of motor technologies
{| class="wikitable"
|-
!  !! [[Stepping motor]] !! DC servo !! BLDC servo !! AC servo
|-
| [[Closed loop]] || No || Yes || Yes || Yes 
|-
| Torque control || No, inpractical || Yes || Yes || Yes 
|-
| Velocity control || Yes || Yes || Yes || Yes 
|-
| Position control || Yes || Yes || Yes || Yes 
|-
| Available speed range || Low, Medium || Medium || High || Highest
|-
| Rated torque vs size || High || Low || Medium || Medium
|-
| Dynamic performance || Low, medium || Medium||High||High
|-
| Motion smoothness || Low to high||Medium||Medium||High
|-
| Endurance || High || Medium || High || High
|-
| Energy efficiency || Low, medium || Medium || High || High
|-
| Safety concerns 
| No safe torque limit,
loss of position,
hot surface 
| Runaway if feedback lost
|
|
|}

==See also==
*[[Feedback devices]]