Pulse and direction

From Granite Devices Knowledge Wiki
Revision as of 01:37, 19 April 2012 by 77.86.192.128 (Talk)


Jump to: navigation, search
Pulse and direction signals

Pulse and direction, step and direction or pulse train refers to digital signaling type used in position control. Pulse & dir is famous from stepping motor drives but it also can be used in many servo drives as position or velocity reference signal.

Principle

Pulse & dir contains two digital signal lines:

  • Pulse - a signal that will control motion distance & speed
  • Direction - a signal that will control direction of motion

Pulse has constant distance increment, i.e. 1/1000 of revolution. So to rotate motor one revolution it takes 1000 pulses. To rotate in reverse direction, direction signal state is changed.


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.