Difference between revisions of "SMV2BRK"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
(Created page with "thumb SMV2BRK is a product name for for SimpleMotion V2 break out board. The purpose of SMV2BRK is to: *Terminate the RS485 bus (be the...")
(No difference)

Revision as of 20:15, 30 October 2014

SMV2BRK boards

SMV2BRK is a product name for for SimpleMotion V2 break out board. The purpose of SMV2BRK is to:

  • Terminate the RS485 bus (be the last device on the bus with proper termination impedance)
  • Break out the enable and STO signals for easy wiring through wire terminals

Usage

Dimensions and pin-out of SMV2BRK

SMV2BRK is intented to be wired to E-stop button of the motion control system. The following diagram illustrates the preferred wiring:

Smv2brk Usageschem.png

For testing purposes, or if no STO or Enable need to be controlled, SMV2BRK may be wired by short pieces of wire which always keep STO disabled and Enable active:

Smv2brk Usageschemsimple.png

Availability

SMV2BRK is available through Granite Devices web shop.