Difference between revisions of "SimpleMotion V2 compatible communication interface device"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(Known good devices)
Line 9: Line 9:
 
===Known good devices===
 
===Known good devices===
 
*[[SimpleMotion V2 USB adapter]]
 
*[[SimpleMotion V2 USB adapter]]
 +
*[[[http://www.ftdichip.com/ FTDI] USB UART based RS485 adapters]]
 +
 
===Known incompatible devices===
 
===Known incompatible devices===
 
None yet
 
None yet
 
[[Category:SimpleMotion]]
 
[[Category:SimpleMotion]]

Revision as of 15:29, 17 August 2013

This page lists known good interface devices for SimpleMotion V2 bus.

Compatibility in theory

To communicate with SimpleMotion V2 bus, a RS485 serial port is needed. The requirements are:

  • 460800 PBS bitrate support
  • 8 data bits + 1 data bit
  • Half duplex RS485 with 3 wires: ground, A, B
  • Visible as serial port on a PC (COM port in Windows, /dev/ttyNNN in Unix)

List of tested devices

Known good devices

Known incompatible devices

None yet